Changes

Jump to navigation Jump to search
no edit summary
Line 129: Line 129:  
It is a common misconception that 100% is always the best solution to creating a strong part. While 100% infill will create the strongest possible part, the ratio between printing time and part strength worsens as you increase the infill density, especially after approximately 60%. Selecting 100% is therefore often a waste of time and material in comparison to lower infills.<ref>Alvarez C, Kenny L, Lagos C, Rodrigo F,  & Aizpun, Miguel. (2016). Investigating the influence of infill percentage on the mechanical properties of fused deposition modelled ABS parts. ''Ingeniería e Investigación'', ''36''(3), 110-116. Available online: http://www.scielo.org.co/scielo.php?script=sci_arttext&pid=S0120-56092016000300015</ref>
 
It is a common misconception that 100% is always the best solution to creating a strong part. While 100% infill will create the strongest possible part, the ratio between printing time and part strength worsens as you increase the infill density, especially after approximately 60%. Selecting 100% is therefore often a waste of time and material in comparison to lower infills.<ref>Alvarez C, Kenny L, Lagos C, Rodrigo F,  & Aizpun, Miguel. (2016). Investigating the influence of infill percentage on the mechanical properties of fused deposition modelled ABS parts. ''Ingeniería e Investigación'', ''36''(3), 110-116. Available online: http://www.scielo.org.co/scielo.php?script=sci_arttext&pid=S0120-56092016000300015</ref>
   −
In other words, if your part will not be facing any mechanical strain, <u>we recommend you select an infill percentage between 5-20%</u>. If strain is expected and strength is required, <u>use 60% at the very most</u>.
+
In other words, if your part will not be facing any mechanical strain, <u>we recommend you select an infill percentage between 5-20%</u>. If high strains are expected and thus strength is required, <u>use 60% at the very most</u>.
    
===Supports===
 
===Supports===
295

edits

Navigation menu