MakerRepo Administrators, MakerRepo Staff
531
edits
Changes
Jump to navigation
Jump to search
Line 200:
Line 200: − ===Start the print===+ − Starting your print is very simple. Simply save your file to an SD card or connect your computer to the printer and click print or build. − − '''Dremel''' − − If you are using a USB cord, the print with start automatically when you hit build in on your computer. Follow the following step if you are using the SD card. − − − #If the 3D printer is not already on, turn on the printer using the on/off switch located at the right hand side near the back of the printer. − #Using the front screen, press build ->The picture of an SD card ->select your file -> Build.
Digital technologies/3D printing/3D printing- Intermediate (view source)
Revision as of 18:26, 4 June 2024
, 4 June→Start the print
}}
}}
#
#Place your SD card in the SD card slot in the 3D printing. This is found on the right hand side near the front of the printer.
==[[Digital technologies/3D printing/3D printing- Intermediate/Custom Slicer Settings|Custom Slicer Settings as an Intermediate User]]==
==[[Digital technologies/3D printing/3D printing- Intermediate/Custom Slicer Settings|Custom Slicer Settings as an Intermediate User]]==