295
edits
Changes
Jump to navigation
Jump to search
Line 20:
Line 20: − +
Digital technologies/3D printing/3D printing- Beginner (view source)
Revision as of 00:22, 23 June 2022
, 00:22, 23 June 2022→= Print Speed
[[File:Layer-height orig.jpg|center|frame|Effect of layer heights on Z quality.<ref>B3D Online (2022). FFF/FDM 3D Print 101-Layer Height, Infill & Support. Accessed 2022/05/16 at <nowiki>https://www.b3d-online.com/blog-news/ffffdm-3d-print-101-layer-height-infill-support</nowiki></ref>]]
[[File:Layer-height orig.jpg|center|frame|Effect of layer heights on Z quality.<ref>B3D Online (2022). FFF/FDM 3D Print 101-Layer Height, Infill & Support. Accessed 2022/05/16 at <nowiki>https://www.b3d-online.com/blog-news/ffffdm-3d-print-101-layer-height-infill-support</nowiki></ref>]]
==== Print Speed ===
==== Print Speed ====
The print speed is another one of those obvious parameters that will affect print times. Since the beginner slicing methods do not include modifications to print speed, going over this parameter was considered out of the scope of beginner knowledge and such print speed will be discussed in the intermediate page.
The print speed is another one of those obvious parameters that will affect print times. Since the beginner slicing methods do not include modifications to print speed, going over this parameter was considered out of the scope of beginner knowledge and such print speed will be discussed in the intermediate page.