Changes

Digital technologies/3D printing/3D printing- Intermediate (view source)

Revision as of 18:26, 4 June 2024

699 bytes removed , 4 June

→‎Start the print

Line 200: Line 200:

}}

−

~~===Start the print===~~

+

#

−

~~Starting your print is very simple. Simply save your file to an SD card or connect your computer to the printer and click print or build.~~

−

~~'''Dremel'''~~

−

~~If you are using a USB cord, the print with start automatically when you hit build in on your computer. Follow the following step if you are using the SD card.~~

−

#~~Place your SD card in the SD card slot in the 3D printing. This is found on the right hand side near the front of the printer.~~

−

~~#If the 3D printer is not already on, turn on the printer using the on/off switch located at the right hand side near the back of the printer.~~

−

~~#Using the front screen, press build ->The picture of an SD card ->select your file -> Build.~~

==[[Digital technologies/3D printing/3D printing- Intermediate/Custom Slicer Settings|Custom Slicer Settings as an Intermediate User]]==

Kaily

MakerRepo Administrators, MakerRepo Staff

531

edits