CEED Wiki

Changes

Digital technologies/3D printing/3D printing- Intermediate (view source)

Revision as of 18:16, 4 June 2024

4,164 bytes added ,  4 June
→‎Our Printers
Line 42: Line 42:     
==== Our Printers ====
 
==== Our Printers ====
 +
 +
The following are the printers available for use at the Makerspaceː {{PrinterInfobox
 +
| name = Ultimaker 2+
 +
| image = Ultimaker2+.png
 +
| slicerName = Cura
 +
| slicerLink = https://ultimaker.com/cura
 +
| materials = PLA, ABS, Flexible, etc
 +
| minLayerHeight = 0.06
 +
| heatedBuildPlate = Yes
 +
| float = none
 +
| buildWidth = 223
 +
| buildDepth = 223
 +
| buildHeight = 205
 +
| moreInformation = https://en.wiki.makerepo.com/wiki/Ultimaker_2%2B
 +
}}
 +
 +
{{PrinterInfobox
 +
| name = Ultimaker 3
 +
| image = Ultimaker3.png
 +
| slicerName = Cura
 +
| slicerLink = https://ultimaker.com/cura
 +
| materials = PLA, PVA, Flexible, etc
 +
| minLayerHeight = 0.02
 +
| heatedBuildPlate = Yes
 +
| float = none
 +
| buildWidth = 215
 +
| buildDepth = 215
 +
| buildHeight = 200
 +
| moreInformation = https://en.wiki.makerepo.com/wiki/Ultimaker_3
 +
}}
 +
 +
{{PrinterInfobox
 +
| name = MakerBot Replicator 2
 +
| image = Replicator2.png
 +
| slicerName = MakerBot Print
 +
| slicerLink = https://support.makerbot.com/s/article/MakerBot-Desktop-Download
 +
| materials = PLA
 +
| minLayerHeight = 0.1
 +
| heatedBuildPlate = No
 +
| float = none
 +
| buildWidth = 285
 +
| buildDepth = 153
 +
| buildHeight = 155
 +
| moreInformation = https://en.wiki.makerepo.com/wiki/MakerBot_Replicator_2
 +
}}
 +
 +
{{PrinterInfobox
 +
| name = Dremel 3D20
 +
| image = Dremel-3D20.png
 +
| slicerName = DigiLab 3D
 +
| slicerLink = https://digilab.dremel.com/3D-software
 +
| buildVolume = 230 × 150 × 140 mm
 +
| materials = PLA
 +
| minLayerHeight = 0.1
 +
| heatedBuildPlate = No
 +
| float = none
 +
| buildWidth = 230
 +
| buildDepth = 150
 +
| buildHeight = 140
 +
| moreInformation = https://en.wiki.makerepo.com/wiki/Dremel_3D20
 +
}}
 +
 +
{{PrinterInfobox
 +
| name = Raise3D N2 Plus
 +
| image = Raise3D_N2_Plus.png
 +
| slicerName = ideaMaker
 +
| slicerLink = https://www.raise3d.com/pages/download
 +
| buildVolume = 304.8 × 304.8 × 609.6 mm
 +
| materials = PLA, ABS, PVA, Flexible
 +
| minLayerHeight = 0.01
 +
| heatedBuildPlate = Yes
 +
| float = none
 +
| buildWidth = 305
 +
| buildDepth = 305
 +
| buildHeight = 605
 +
| moreInformation = https://en.wiki.makerepo.com/wiki/Raise3D_N2_Plus
 +
}}
 +
 +
{{PrinterInfobox
 +
| name = FLsun v400
 +
| image = Flsun v400.jpg
 +
| slicerName = Cura
 +
| slicerLink = https://ultimaker.com/cura
 +
| buildVolume = ⌀300 × 410 mm
 +
| materials = PLA, ABS, Flexible, etc
 +
| minLayerHeight = 0.05
 +
| heatedBuildPlate = Yes
 +
| float = none
 +
| buildWidth = 300
 +
| buildDepth = 300
 +
| buildHeight = 410
 +
| moreInformation = https://en.wiki.makerepo.com/wiki/Flsun_v400
 +
}}
 +
 +
{{PrinterInfobox
 +
| name = Markforged Mark Two
 +
| image = Mk2.png
 +
| slicerName = Eiger
 +
| slicerLink = https://www.eiger.io/signin
 +
| buildVolume = 320 × 132 × 154 mm
 +
| materials = Nylon, Onyx, Carbon Fiber, Fiberglass, Kevlar
 +
| minLayerHeight = 0.1
 +
| heatedBuildPlate = No
 +
| float = none
 +
| buildWidth = 320
 +
| buildDepth = 132
 +
| buildHeight = 154
 +
| moreInformation = https://en.wiki.makerepo.com/wiki/Markforged_Mark_Two
 +
}}
 +
 +
{{PrinterInfobox
 +
| name = Stratasys Dimension SST 1200es
 +
| image = Dimension-1200es.jpg
 +
| slicerName = GrabCAD Print
 +
| slicerLink = https://grabcad.com/print
 +
| buildVolume = 254 × 254 × 305 mm
 +
| materials = ABS, Soluble support
 +
| minLayerHeight = 0.254
 +
| heatedBuildPlate = Yes
 +
| float = none
 +
| buildWidth = 254
 +
| buildDepth = 254
 +
| buildHeight = 305
 +
| moreInformation = https://en.wiki.makerepo.com/wiki/Stratasys_Dimension_SST
 +
}}
 +
 +
{{PrinterInfobox
 +
| name = Stratasys F170
 +
| image = stratasys-f170.jpg
 +
| slicerName = GrabCAD Print
 +
| slicerLink = https://grabcad.com/print
 +
| buildVolume = 254 × 254 × 254 mm
 +
| materials = PLA, ABS, ASA, TPU, Soluble support
 +
| minLayerHeight = 0.127
 +
| heatedBuildPlate = Yes
 +
| float = none
 +
| buildWidth = 254
 +
| buildDepth = 254
 +
| buildHeight = 254
 +
| moreInformation = https://en.wiki.makerepo.com/wiki/Stratasys_F170
 +
}}
 +
 +
{{PrinterInfobox
 +
| name = Elegoo Saturn 2 8k
 +
| image = elegoo saturn 2.jpg
 +
| slicerName = ChituBox
 +
| slicerLink = https://www.chitubox.com/en/download/chitubox-free
 +
| buildVolume = 218.88 × 123.12 × 250 mm
 +
| materials = Standard, ABS-like, rubber, etc
 +
| minLayerHeight = 0.01
 +
| heatedBuildPlate = No
 +
| float = none
 +
| buildWidth = 218.88
 +
| buildDepth = 123.12
 +
| buildHeight = 250
 +
| moreInformation = https://en.wiki.makerepo.com/wiki/Elegoo_Saturn2
 +
}}
    
===Start the print===
 
===Start the print===
Kaily
MakerRepo Administrators, MakerRepo Staff
531

edits

Retrieved from "https://en.wiki.makerepo.com/wiki/Special:MobileDiff/1854"