Changes

Normally when you lase cut something, the laser will start at the top left of the image. If you select the center engraving option, the engraving will start in the center of the image. This can be useful if you have a job the is circular.  

Normally when you lase cut something, the laser will start at the top left of the image. If you select the center engraving option, the engraving will start in the center of the image. This can be useful if you have a job the is circular.  

== Raster with paint ==

== [[Digital technologies/Laser cutting/Laser cutting- Intermediate/Raster with paint|Raster with paint]] ==

As I’m sure you have seen, the makerspace has a variety of laser cut signs that have incorporated colour to draw your attention. Theses signs were created using the same laser cutters as the ones you use in the space for other operations. All you will need is some paint, a paint brush, material board, and of course the laser cutter. In this process you will have to run a raster job multiple times to remove a negative version of the desired file.

As I’m sure you have seen, the makerspace has a variety of laser cut signs that have incorporated colour to draw your attention. Theses signs were created using the same laser cutters as the ones you use in the space for other operations. All you will need is some paint, a paint brush, material board, and of course the laser cutter. In this process you will have to run a raster job multiple times to remove a negative version of the desired file.