MakerRepo Staff, MakerRepo Volunteers
872
edits
Changes
Jump to navigation
Jump to search
Line 130:
Line 130: − +
Digital technologies/Laser cutting/Laser cutting- Beginner/How to Laser Cut in the Makerspace/Zing (view source)
Revision as of 19:32, 13 June 2024
, 13 June→Clean up[2]
*Remove the vector grid from the laser cutter.
*Remove the vector grid from the laser cutter.
*Loosen the green thumb crews to remove the front plate.
*Loosen the green thumb crews to remove the front plate.
*Remove the debris
*Remove the debris and clean the tray.
*Fit the front plate back to the vector grid.
*Fit the front plate back to the vector grid.
*Place the vector grid back into the laser cutter, carefully aligning the three circles on the vector grid on the vector circles of the laser cutter.
*Place the vector grid back into the laser cutter, carefully aligning the three circles on the vector grid on the vector circles of the laser cutter.