MakerRepo Staff, MakerRepo Volunteers
872
edits
Changes
Jump to navigation
Jump to search
Line 52:
Line 52: − + − +
Digital technologies/Laser cutting/Laser cutting- Beginner/How to Laser Cut in the Makerspace/Zing (view source)
Revision as of 18:46, 13 June 2024
, 13 June→Properties
#'''Piece size:''' Enter the size of the document of the job.
#'''Piece size:''' Enter the size of the document of the job.
#'''Raster Settings:'''
#'''Raster Settings:'''
#*'''Speed:''' Determines the travel speed of the laser. It can be increased increments of 1%. The lower the speed, the deeper the cut. Each materials have their own specific value and can be in “Suggested Material settings” which is located on the Maker mobile.
#*'''Speed:''' Determines the travel speed of the laser. It can be increased increments of 1%. The lower the speed, the deeper the cut. Each materials have their own specific value and can be in “Suggested Material settings” which is located on the table, next to the laser cutter.
#*'''Power:''' Determines the amount of laser energy that is delivered to the piece being cut/engraved and is adjustable in 1% increments. Each materials have their own specific value and can be in “Suggested Material settings” which is located on the Maker mobile.
#*'''Power:''' Determines the amount of laser energy that is delivered to the piece being cut/engraved and is adjustable in 1% increments. Each materials have their own specific value and can be in “Suggested Material settings” which is located on the table, next to the laser cutter.
#'''Vector Settings:'''
#'''Vector Settings:'''
#*'''Speed:''' Determines the travel speed of the laser. It can be increased increments of 1%. The lower the speed, the deeper the cut. Each materials have their own specific value and can be in “Suggested Material settings” which is located on the Maker mobile.
#*'''Speed:''' Determines the travel speed of the laser. It can be increased increments of 1%. The lower the speed, the deeper the cut. Each materials have their own specific value and can be in “Suggested Material settings” which is located on the Maker mobile.