MakerRepo Staff, MakerRepo Volunteers
872
edits
Changes
Jump to navigation
Jump to search
Line 43:
Line 43: − +
Digital technologies/Laser cutting/Laser cutting- Beginner/How to Laser Cut in the Makerspace/Zing (view source)
Revision as of 16:10, 13 June 2024
, 13 June→Properties
=== Properties ===
=== Properties ===
The other way for the user to interact with the laser cutter is by setting up the laser properties for a cut.
The other way for the user to interact with the laser cutter is by setting up the laser properties for a cut.
[[File:Properties.jpg|thumb|Properties]]
# '''Resolution:''' The print resolution can set from 75 to 1000 Dots per inch (DPI), the higher the DPI the more time it takes for laser cutter to complete the job.Usually, the print resolution is set at 500 DPI, the settings on the laptop will demonstrate the same.
# '''Resolution:''' The print resolution can set from 75 to 1000 Dots per inch (DPI), the higher the DPI the more time it takes for laser cutter to complete the job.Usually, the print resolution is set at 500 DPI, the settings on the laptop will demonstrate the same.
# '''Auto Focus:'''In the Makerspace we use a manual focus instead of Auto Focus. Please, '''NEVER''' check the box, it will make the bed crash into the laser head
# '''Auto Focus:'''In the Makerspace we use a manual focus instead of Auto Focus. Please, '''NEVER''' check the box, it will make the bed crash into the laser head