MakerRepo Staff, MakerRepo Volunteers
872
edits
Changes
Jump to navigation
Jump to search
Line 136:
Line 136: − + Line 148:
Line 148: − +
Digital technologies/Laser cutting/Laser cutting- Beginner/How to Laser Cut in the Makerspace/Zing (view source)
Revision as of 21:00, 12 June 2024
, 12 June→Troubleshooting Laser Cutter Issues-To edit
* Place the vector grid back into the laser cutter, carefully aligning the three circles on the vector grid on the vector circles of the laser cutter.
* Place the vector grid back into the laser cutter, carefully aligning the three circles on the vector grid on the vector circles of the laser cutter.
== Troubleshooting Laser Cutter Issues-To edit ==
== Troubleshooting Laser Cutter Issues ==
# File not sending to the Laser Cutter
# File not sending to the Laser Cutter
#* Try opening the file back in Inkscape or your preferred vector software and make sure the lines are a solid color
#* Try opening the file back in Inkscape or your preferred vector software and make sure the lines are a solid color
# Laser starts shifting on the side
# Laser starts shifting on the side
#* Stop the print and make sure the size doesn't exceed the size of the laser's bed (Zing 12"x12")
#* Stop the print and make sure the size doesn't exceed the size of the laser's bed (Zing 16"x12")
#* Ask the staff to check the laser, but this issue will probably mean that the laser needs to go 'Out of Order' for maintenance
#* Ask the staff to check the laser, but this issue will probably mean that the laser needs to go 'Out of Order' for maintenance
# Only part of the file gets printed
# Only part of the file gets printed