Changes

Jump to navigation Jump to search
Line 111: Line 111:  
* Higher temperatures can damage
 
* Higher temperatures can damage
   −
==== How to Strip a Wire ====
+
==== How to Strip a Wire: ====
 
Soldering two wires is the best way to practice soldering at the very beginning. There are two types of wire, either stranded or solid core. Both have a metal core wrapped in a plastic covering. To see the metal, you need to expose the core by removing the plastic. This can be done using wire strippers or wire cutters.
 
Soldering two wires is the best way to practice soldering at the very beginning. There are two types of wire, either stranded or solid core. Both have a metal core wrapped in a plastic covering. To see the metal, you need to expose the core by removing the plastic. This can be done using wire strippers or wire cutters.
    
===== Wire Stripping: =====
 
===== Wire Stripping: =====
 
When using wire strippers - place the wire in the slot written to be for the wire gauge you’re using and gently press around the tubing. You want to be sure to avoid cutting through the core of the wire since the goal is to expose the core. Once the perimeter of the covering has been cut through you will then remove it by slipping it off the core as seen below.
 
When using wire strippers - place the wire in the slot written to be for the wire gauge you’re using and gently press around the tubing. You want to be sure to avoid cutting through the core of the wire since the goal is to expose the core. Once the perimeter of the covering has been cut through you will then remove it by slipping it off the core as seen below.
 
+
[[File:Wss.png|center|thumb|528x528px|Cited from: https://www.bobvila.com/articles/how-to-strip-wire/]]
'''INSERT VIDEOS AND PHOTO'''
      
=== Procedure ===
 
=== Procedure ===
   −
==== Principles of Soldering ====
+
==== Principles of Soldering: ====
 
<u>''Tip Tinning''</u>
 
<u>''Tip Tinning''</u>
  
MakerRepo Staff, MakerRepo Volunteers
240

edits

Navigation menu