Changes

Jump to navigation Jump to search
no edit summary
Line 52: Line 52:  
*Never disassemble the machine or remove protective covers. Never open the machines access panels while unit is plugged in. The AC input to the Epilog Laser is potentially lethal and fully contained in the cabinet.  
 
*Never disassemble the machine or remove protective covers. Never open the machines access panels while unit is plugged in. The AC input to the Epilog Laser is potentially lethal and fully contained in the cabinet.  
   −
*Tips: There are a few important safety features incorporated into the laser cutter. Placed on the glass lid is a magnetic switch. If the lid is opened while the laser is running, the lense mechanism will keep moving, but the laser will stop firing. This means that it is very difficult (if not impossible) to burn yourself with the laser. A similar mechanism is incorporated into the front door.
+
'''Tips: There are a few important safety features incorporated into the laser cutter. Placed on the glass lid is a magnetic switch. If the lid is opened while the laser is running, the lense mechanism will keep moving, but the laser will stop firing. This means that it is very difficult (if not impossible) to burn yourself with the laser. A similar mechanism is incorporated into the front door.'''
 
===Control Panel===
 
===Control Panel===
 
As shown in the image below, the laser cutter has an on/off located on the bottom left hand side of the laser. The main control panel located on the front.
 
As shown in the image below, the laser cutter has an on/off located on the bottom left hand side of the laser. The main control panel located on the front.
MakerRepo Administrators, MakerRepo Staff
213

edits

Navigation menu