MakerRepo Administrators, MakerRepo Staff
756
edits
Changes
Digital technologies/3D printing/3D printing- Beginner (view source)
Revision as of 11:51, 21 June 2021
, 11:51, 21 June 2021no edit summary
| heatedBuildPlate = No
| heatedBuildPlate = No
|float=none|buildWidth=320|buildDepth=132|buildHeight=154|recommendedSettings=https://en.wiki.makerepo.com/wiki/Markforged_Mark_Two}}
|float=none|buildWidth=320|buildDepth=132|buildHeight=154|recommendedSettings=https://en.wiki.makerepo.com/wiki/Markforged_Mark_Two}}
==[[Digital technologies/3D printing/3D printing- Beginner/3D printing in our Makerspace|3D printing in our Makerspace]]==
==[[Digital technologies/3D printing/3D printing- Beginner/3D printing in our Makerspace|3D printing in our Makerspace]]==
At the uOttawa Makerspace we have several different types (brands) of printers. When printing you will encounter either the Ultimaker, MakerBot, or Dremel. In general, the processes are similar.
At the uOttawa Makerspace we have several different types (brands) of printers. When printing you will encounter either the Ultimaker, MakerBot, or Dremel. In general, the processes are similar.