MakerRepo Administrators, MakerRepo Staff
756
edits
Changes
Digital technologies/3D printing/3D printing- Beginner (view source)
Revision as of 14:05, 16 June 2021
, 14:05, 16 June 2021no edit summary
| minLayerHeight =0.06
| minLayerHeight =0.06
| heatedBuildPlate =Yes
| heatedBuildPlate =Yes
|float=none|buildWidth=223|buildDepth=223|buildHeight=205|Recommended Settings=https://en.wiki.makerepo.com/wiki/Ultimaker_2%2B}}
|float=none|buildWidth=223|buildDepth=223|buildHeight=205|recommendedSettings=https://en.wiki.makerepo.com/wiki/Ultimaker_2%2B}}
{{PrinterInfobox
{{PrinterInfobox
| minLayerHeight = 0.02
| minLayerHeight = 0.02
| heatedBuildPlate = Yes
| heatedBuildPlate = Yes
|float=none|buildWidth=215|buildDepth=215|buildHeight=200|Recommended Settings=https://en.wiki.makerepo.com/wiki/Ultimaker_2%2B}}
|float=none|buildWidth=215|buildDepth=215|buildHeight=200|recommendedSettings=https://en.wiki.makerepo.com/wiki/Ultimaker_2%2B}}
{{PrinterInfobox
{{PrinterInfobox
| minLayerHeight = 0.1
| minLayerHeight = 0.1
| heatedBuildPlate = No
| heatedBuildPlate = No
|float=none|buildWidth=285|buildDepth=153|buildHeight=155}}
|float=none|buildWidth=285|buildDepth=153|buildHeight=155|recommendedSettings=none}}
{{PrinterInfobox
{{PrinterInfobox