Changes

* Place the vector grid back into the laser cutter, carefully aligning the three circles on the vector grid on the vector circles of the laser cutter.

* Place the vector grid back into the laser cutter, carefully aligning the three circles on the vector grid on the vector circles of the laser cutter.

== Troubleshooting Laser Cutter Issues-To edit ==

== Troubleshooting Laser Cutter Issues ==

# File not sending to the Laser Cutter

# File not sending to the Laser Cutter

#* Try opening the file back in Inkscape or your preferred vector software and make sure the lines are a solid color

#* Try opening the file back in Inkscape or your preferred vector software and make sure the lines are a solid color

# Laser starts shifting on the side

# Laser starts shifting on the side

#* Stop the print and make sure the size doesn't exceed the size of the laser's bed (Zing 12"x12")

#* Stop the print and make sure the size doesn't exceed the size of the laser's bed (Zing 16"x12")

#* Ask the staff to check the laser, but this issue will probably mean that the laser needs to go 'Out of Order' for maintenance

#* Ask the staff to check the laser, but this issue will probably mean that the laser needs to go 'Out of Order' for maintenance

# Only part of the file gets printed

# Only part of the file gets printed