MakerRepo Staff
59
edits
Changes
Digital technologies/3D printing/3D printing- Intermediate (view source)
Revision as of 21:29, 28 August 2023
, 21:29, 28 August 2023→Selecting Nozzle Sizes
==[[Digital technologies/3D printing/3D printing- Intermediate/Selecting Nozzle Sizes|Selecting Nozzle Sizes]]==
==[[Digital technologies/3D printing/3D printing- Intermediate/Selecting Nozzle Sizes|Selecting Nozzle Sizes]]==
[[File:Nozzle Size.png|thumb]]
Nozzle size is the first decision to make when 3D printing. Within Makerspace, there are four options of nozzle size using the Ultimaker 2+, 0.25mm, 0.4mm, 0.6mm, and 0.8mm. Choosing between the options depends on the fine details of the model and the print speed required.
* A smaller nozzle size will allow for finer details and better dimension accuracy. However, it will also take longer to print the model.
* A larger nozzle can provide faster print time and also create stronger prints.
* A smaller nozzle diameter can cause it to be more difficult to print with overhangs as each layer has less width to adhere to the next one.
* However, with a smaller nozzle, the supports are easier to remove as the printer will use less material for supports making it easier to break away.
* A larger nozzle is able to print with less infill as the walls would be thicker to ensure strength.
== References ==
== References ==
<references />
<references />