Changes

=== Vectoring ===

=== Vectoring ===

Vectoring consists of following vector lines specified in your program. Vectoring is most often used to cut through a material. However, at lower settings it can also be used to engrave. Instead of moving back and forth, the laser is following a “vector”. A vector is a line with a specified direction and magnitude. In other words, a line that connects two points. Our laser has a point of 0.001” (0.0254 mm) in diameter. For a line to be recognized as a vector, the line width has to be the size of the point. We will explain how to do this further in this document.

Vectoring consists of following vector lines specified in your program. Vectoring is most often used to cut through a material. However, at lower settings it can also be used to engrave. Instead of moving back and forth, the laser is following a “vector”. A vector is a line with a specified direction and magnitude. In other words, a line that connects two points. Our laser has a point of 0.001” (0.0254 mm) in diameter. For a line to be recognized as a vector, the line width has to be the size of the point. We will explain how to do this further in this document.

<br />

<br />

===Laser Cutter Setup===

===Laser Cutter Components===

In order to use a laser cutter, there are 4 parts that need to be available:

In order to use a laser cutter, there are 4 parts that need to be available: