View source for Digital technologies/3D printing/3D modeling- Beginner

Tinkercad is an easy software that allows you to design 3D designs. It is easy to learn and simple to use. We strongly suggest you use this if this is your first time designing in 3D. To begin with, go to tinkercad.com and create an account. We recommend you create an Autodesk account. It's free and if you are a student, you get to have access to a bunch other Autodesk software for free!

==[[Digital technologies/3D printing/3D modeling- Beginner/TinkerCAD Layout|TinkerCAD Layout]]==

===Splash Page (Designs & Projects)===
The TinkerCAD splash page is very simple. On the left, you may switch design categories. This is necessary because TinkerCAD allows design of electronics circuitry and code as well as 3D modeling! For this wiki page, the relevant mode is 3D Design. On the centre of your page, you will find all your designs. It is recommended that you do not forget altogether about the navigation on the left, since chances are that you will want to create a project at some point, that will include all three design categories, for which we recommend you create a project in TinkerCAD, which can hold all design categories. This will help with keeping your workspace organised. The following buttons are useful

*Tinkercad logo: Clicking on the Tinkercad logo with bring you back to the splash page
*LEARN: The LEARN is where you can find tutorials to help you navigate the software a little easier. There are also lessons walking you through basic projects to inspire different ideas and to practice with the software.
*GALLERY: The GALLERY is where you can see projects that other people have made visible to the public, you can copy and modify those designs or inspire yourself from them.
*Create a new design: To create a new design in Tinkercad, sign in and it will lead you to the desktop. Select the '''Create new design''' button and this will bring you to a blank workspace.

If you wish to modify a 3D model, click on the model on the main section, and then click 'Tinker this' to access the CAD Modeling page.

===CAD Modeling===
The design page has quite a few sections and buttons, but it all remains quite straightforward. Refer to the following image for a list of buttons. For some of the buttons, the function is self-explanatory. If you are unsure what a button does, it is likely that the function is explained in the next sections. 
[[File:TinkerCAD Design EN.svg|alt=Description of 3D design buttons.|center|The 3D design mode layout with the description for each annotated.|thumb|1000x1000px]] 
 
==[[Digital technologies/3D printing/3D modeling- Beginner/Create a New Design|Create a New Design]]==
When you click “Create a new design" in the splash page, you are brought to a new window with a blue, gridded, base workplane (as illustrated in the sction above0. Think of the base workplane as a floor or the base of the 3D printer. You want to make sure that the part you are building is sitting on the this surface. This is where you will do your designing. There are several tools which you can use to help you design.

#Name of your design: To change the name of your design, click on the automatically generated name that is in the top left corner. This is useful to be able to find the design later and know what it is.
#View square: Drag around the square to change the viewing angle.
#View buttons: Bring the viewing angle back to home, change the zoom, switch to orthogonal view
#Show all: This will show any hidden shapes. While designing, you can choose to hide a shape. This is sometimes helpful if you want to see a piece that is under another.
#Group: Take several shapes and turn them into one shape
#Ungroup: Take a shape that is composed of several pieces, and separate them back into individual pieces.
#Align: Align several pieces
#Mirror: Mirror a component
#Import: You can also import shapes that have already been created using the '''Import''' button. You can add both 2D and 3D shapes. The file type for 2D shapes needs to be “'''.svg'''”, and the file type for 3D shapes is “'''.stl'''” or “'''.obj'''”
#Export: Download the selected object or everything on the build plate. Download it as an .stl for 3D printing and a .svg for laser cutting.

==[[Digital technologies/3D printing/3D modeling- Beginner/Using TinkerCAD|Using TinkerCAD]]==
On the right hand side there are a series of different shapes that you can place on the your workplane (shape browser). These are your building blocks. If you click on building '''Basic Shapes''' you can select different types of shapes (or blocks).
[[File:Basicshapes.png|alt=|none|thumb|400x400px|The shape type selector drop down.]]

There are shapes that are registered as '''Holes''' by default. These are hatched gray and white on the shape browser. If you move them to the workplane, they will appear translucent. As you will learn, this is not very useful because any shape can be turned into a hole. For example, if you found model you liked on Tinkercad and you wanted to add a new hole.

Once you have your shape you can change the size with:

*Black cube: Change one dimension
*White cube: Change two dimensions (unless it is the shape's height)
*Curved black arrows: Rotate shape in that plane
*Black cone: Raise or lower shape

[[File:TinkerCAD_Move_and_Scale_Shape_EN.svg|alt=|none|The shape position and size handles.|thumb|400x400px]]


If you are putting a piece on top of another, make sure the piece is not floating. Every piece should be touching another one or be on the platform.
[[File:Changeview.png|alt=|none|Perspective can be deceiving! Make sure your shapes are touching before trying to group them.|thumb|500x500px]]

When you have a shape selected, the '''Shape''' window will open on the top right part of your workspace. This tool lets you choose if this shape is solid (coloured in the workspace) or a hole (hashed and translucent in the workspace). If you want your shape to be a hole, select the hole button and the shape should become translucent. Mind you, it will not actually take into affect until you group those two objects. The group button, found on the top right hand side of your workspace (on the top ribbon), will only be available when there is more than one shape selected. You also want to group all your shapes before downloading (exporting) a model for 3D printing (unless you are working with 2 extruder heads and you want shapes to print independently from one-another).
[[File:Tinkercadgroup.png|alt=|none|thumb|500x500px|Grouping of a solid and a hole shape.]]
To change the name of your design, click on the automatically generated name that is in the top left corner. This is useful to be able to find the design later and know what it is. It is good practice to aim for a relevant name.
[[File:Tinkercadrename.png|alt=|none|thumb|500x500px|You can change the name of your design very easily.]]

==[[Digital technologies/3D printing/3D modeling- Beginner/Other Tools in TinkerCAD|Other Tools in TinkerCAD]]==
Other useful tools can be found above the Tinkercad shapes menus.

{|
 |-
 |<!--col1-->[[File:TinkerCAD_Workplane_Tool_Icon.svg|alt=|middle|frameless|100x100px]]
 |<!--col2-->'''Workplane (W)''' tool allows you to change the work plane to an alternate workplane. Drag it onto the edge of another shape, to set a new work plane. An orange work plane will appear. If you drag a shape onto the plane, it will already appear perpendicular to that plane. You can copy/cut shapes from one plane and paste them to other planes. To get rid of the new orange plane, drag a new plane back to the original blue one.
 |-
 | colspan="2" |[[File:Usingworkplane.png|frameless|center|800x800px|alt=]]
|}

{|
 |-
 |<!--col1-->[[File:TinkerCAD Ruler Icon.svg|alt=|left|frameless|100x100px]]
 |<!--col2-->'''Ruler (R)''' allows for you to easily change the dimensions of the shape. Just place it anywhere on the workplane and the dimensions will appear. Just click on the dimensions and you can change their value.  Highlighted in blue are the overall dimensions, in green are the offsets between the shape's endpoint and that of the ruler. The ruler mode can be changed to dimension symmetrically from the shape's midplanes as well.
 |-
 | colspan="2" |[[File:Ruler.png|alt=Illustration of the ruler tool.|frameless|center|800x800px]]
|}

Next to the group button, there is another set of useful tools, '''Align (L)''' and '''Flip (M)'''.
{|
 |-
 |[[File:Align Icon.svg|frameless|middle|80x80px]]
 |'''Align (L)''' will only be available when selecting more than one shape at the same time (you may box select or hold shift down while selecting shapes to select multiple). Of course, this makes sense, as the tool allows you to align two or more shapes relative to another. The alignment can be in either dimension, and is not limited to center alignment (shapes' sides can be aligned as well).
 |-
 |[[File:TinkerCAD Flip Icon.svg|frameless|middle|80x80px]]
 |'''Flip (M)''' is available when one or more shapes are selected. This tool will allow you to mirror a part along its midplanes (X-Y, Y-Z or X-Z). If you select multiple shapes at the same time, the flip tool will see the selection as one shape and use the midplane of the selection as the midplane to perform the flip operation.
|}

==[[Digital technologies/3D printing/3D modeling- Beginner/Printing your Design|Printing your Design]]==
When you are done, and you want to print your new design, click '''Export''' at the top right corner.
[[File:Tinkercadexportbutton.png|alt=|thumb|291x291px|You need to export your model to put it in a slicer software.]]
A new window will appear. If you want to 3D print, choose which shapes you want to print (everything or only some selected shapes) and select the format '''.STL'''. If you want to laser cut a projection of the shape, select the format '''.SVG'''.

For the actual 3D printing or your part, refer to the [[Digital technologies/3D printing|steps found in the 3D printing pages]].
==[[Digital technologies/3D printing/3D modeling- Beginner/Importing Models to TinkerCAD|Importing Models to TinkerCAD]]==
TinkerCAD can be a powerful tool for repairing or editing polygonal models (defined by triangles). Therefore, it is considered fundamental to CAD modeling in TinkerCAD to know how to import a model. You may import polygonal files (STL, OBJ, etc.) to TinkerCAD for modifications, repairs, etc. For example, if one wanted to add a label they designed to a model of a hand, this could be done in TinkerCAD. A hand is however hard to model, but there are lots of them on community CAD libraries, such as [https://www.thingiverse.com/thing:31331 Thingiverse] or [https://grabcad.com/library/anatomy-model-hand-1/details?folder_id=5812099 GrabCAD]. All that needs to be done, is for the model to be downloaded, and imported into TinkerCAD using the '''Import''' button. Once the model is imported, it will appear on the workplane. All the controls relating to shape modifications apply to the imported model! Here's an example of a composite model with the Thingiverse hand and the label from the beginner level proficiency projects example tag:
[[File:Hand Holding Label.png|none|thumb|600x600px|An imported hand model<ref>[https://www.thingiverse.com/john-010 John-010] (2012). ''iPhone Hand''. Thingiverse, accessed 2021-08-17 at https://www.thingiverse.com/thing:31331</ref> is used to illustrate a hand holding the beginner proficiency projects example label.|alt=]]

==[[Digital technologies/3D printing/3D modeling- Beginner/Modeling for 3D Printing|Design for 3D Printing]]==
It is very important, while designing, to be aware of the limitations of the manufacturing method which will be used to make your design reality. Since this article focuses on 3D modeling for 3D printing, this section will only focus on those considerations relating to 3D printing. If you are unsure how 3D printing works, it is imperative that you read through the [[Digital technologies/3D printing/3D printing- Beginner|Beginner 3D Printing]] page on this wiki for you to understand the concepts and considerations discussed below. If your design is to be used in (electro-)mechanical assemblies in which there are interfacing components, is also important that you understand three basic tolerancing concepts and to keep them in the back of your mind when modeling or more generally designing these assemblies. If you will not be designing mechanical and electromechanical assemblies, you can skip to the next subsection.

#Form: The form of a part refers to the overall dimensions and the shape of the exterior surfaces of a component. Think of a flaw referring to form as a print that ended up not matching the base geometry that was used to create it in CAD due to adverse physical variables during the printing process. Examples follow:
##A ''sphere'' may end up slightly ''oval'' once printed due to improper cooling, etc.;
##A pillar might end up tilted to one side due to improper belt tension between the belt axes, etc.;
##A pin feature might end up too large to fit its mating hole due to the printer outputting too much material when producing the outer walls of the feature (the inverse can also be true).
#Position: Position refers to the distance separating a feature and an (ideally) meaningful reference (i.e.: the distance between a hole and the side of a part, or between two holes). Thankfully, flaws pertaining to position are rare on a properly tuned printer, as the printer does not have any information about existing references other than the build plate. If tuned properly, the printer will always print a feature at a position (X,Y,Z) distance relative to another feature, because that is what the gCode will tell it to do. You can imagine, however, that if the part is warped, the 'build plate reference' is no longer valid, and such, warped parts almost always have features out of position ''<u>unless the meaningful reference (interfacing feature) used in the design is not the build plate</u>''. However, since the build plate reference is such an important one to define the Z position of features (for the printer, that is), making your meaningful reference something other than the build plate does not always guarantee you good positional tolerance independent of warping.
#Surface: The surface finish of a part is a rather complex subject. In 3D printing, and for typical applications of 3D printed parts, it mostly refers to the mean (statistical) difference between the height of cusps and valleys on a part and their deviation from that mean, at a macroscopic level. The most important consideration is that when 3D printing, most surface finishes are quite rough (deviate significantly from the mean), and thus are sanded down considerably to knock out the cusps left by the printer. This post processing can negatively affect the form of the final part.

Note that ''<u>a proper mechanical fit between components demands a good tolerance on form, feature position, and surface finish</u>'', such that it is typically impossible to obtain a proper fit when 3D printing, and that if you are considering the 3D printing of critically interfacing components, 3D printing should not be used unless post processing <u>''is built into the design''</u>. For mechanical designs, you will notice that the main application is brackets. This is because brackets only need good positional tolerance on holes and mating faces, which 3D printing can almost always provide (the tolerance on form for holes is not that important since they are typically clearance holes). However, since brackets are easily laser cut, 3D printing brackets is only done under certain specific conditions!

===Supports===

====Form and smoothness====
As explained in the 3D printing page, supports are sometimes required to support overhanging sections of a print. Supports will also require post processing such as removal and sanding (if a nice smooth finish is desired). When designing for mechanical assemblies, it is important to keep in mind that supported sections might sometimes sag slightly, affecting the form of the surface being printed. Therefore, when designing (modeling), make sure that interfacing geometries (those for which the correctness of the shape, or form, is critical as it is interfacing with other parts) are not overhanging.

====Hard to access supports====
Soluble supports are practically never used in our Makerspace for prints. While they are cool and all, most designs can avoid containing supports that are hard or impossible to reach. Intelligent designs do not typically have hard to reach supports unless they are absolutely necessary, in which case soluble supports can be used.

===Build plate adhesion===
When printing, adhesion is one of the main considerations. Make sure your design contains an adequate flat section that, if used as a base for the print, will not lead to excessive overhangs. The Thingiverse hand is a bad example the way it is positioned in '''Importing Models''' section of this article, but the way the flat section of the wrist is designed, and considering the position of the fingers not overhanging (perhaps the pinkie is slightly overhanging), placed on the its flat wrist section, this hand model is expected to print properly without the use of adhesion or even supports!

===Large prints===
Extremely large prints cannot fit your regular build plate (or build volume). Yes, the makerspace does own 3D printers with larger build volumes, but those using them are typically charged for machine time. Instead, it can be extremely easy to split larger prints into smaller sections, and to then adhere these components together once they are all printed. The result might even look better, as sectioned parts can be oriented on the build plate to reduce the use of supports or improve adhesion.

==References==
<references />