Changes

[[File:Vive cont.png|left|thumb|Cited from: https://i5.walmartimages.com/asr/96a045f7-6590-4ef1-a270-cbe1aa5c3a84_1.a9446a4691bec18f7ca8050976af7b3a.jpeg]]

[[File:Vive cont.png|left|thumb|Cited from: https://i5.walmartimages.com/asr/96a045f7-6590-4ef1-a270-cbe1aa5c3a84_1.a9446a4691bec18f7ca8050976af7b3a.jpeg]]

[[File:Vest.png|none|thumb|312x312px|Cited from: https://www.bhaptics.com/tactsuit]]

[[File:Vest.png|none|thumb|312x312px|Cited from: https://www.bhaptics.com/tactsuit]]

=== Uses for VR ===

=== Uses for VR ===

[[File:VR in medicine.png|thumb|VR in medicine]]

[[File:VR in medicine.png|thumb|VR in medicine]]

===Meta Quest 2===

===Meta Quest 2===

[[File:Meta Quest Software.png|thumb|Meta Quest Software]]

[[File:Meta Quest Software.png|thumb|Meta Quest Software]]

# Set up your play area by using the handcontrollers

# Set up your play area in a safe place with minimal hazards present.

#Go to https://www.meta.com/ca/quest/setup/ and download the Meta Quest 2 Software.  

#Go to https://www.meta.com/ca/quest/setup/ and download the Meta Quest 2 Software. Note the software is already downloaded on the laptops at the Makerspace.

#Next mount the base stations and then attach the cameras and plug in the power cables. If the cameras are unable to see each other, use the sync cable.

#After ensuring that your headset is adequately charged, go to the software and pair your laptop with your headset.

#To wire the headset, plug the power adapter into the link box and then into the wall.

#Then you will connect the link box and PC via the USB and HDMI cable.

#Next you will connect the wires from the headset to the orange side of the link box.

#To set up the controllers, power them on.

#To set up the controllers, power them on.

#Finally, you will set up your play area by clicking on launch steam VR, then following the instructions on the screen.

#Finally, you will set up your play area by clicking on launch steam VR, then following the instructions on the screen.