Changes

| rowspan="2" |N/A

| rowspan="2" |N/A

|500

|500

| rowspan="2" |The point is not to cut through the plastic sheeting under the vinyl. Make sure you invert your design file! If you want to cut through the plastic, boost the power to 24% on the 60W laser or 23% on the 50W laser (both of these at 80% speed).

| rowspan="2" |The point is not to cut through the plastic sheeting under the vinyl. Make sure you invert your design file! If you want to cut through the plastic, boost the power to 24% on the 60W laser or 23% on the 50W laser (both of these at 80% speed). Using a flat sheet of MDF under the vinyl will be very beneficial (the static electricity will help the vinyl sheet remain flat)

|-

|-

|[https://craftenablers.com/collections/siser-easyweed-heat-transfer-vinyl-htv Polyurethane base vinyl for adhering to shirts] (60W laser)

|[https://craftenablers.com/collections/siser-easyweed-heat-transfer-vinyl-htv Polyurethane base vinyl for adhering to shirts] (60W laser)

|<nowiki>4% | 20%</nowiki>

|<nowiki>4% | 19%</nowiki>

|5000

|5000

|}

|}