MakerRepo Administrators, MakerRepo Staff
756
edits
Changes
Digital technologies/Laser cutting/Laser cutting- Intermediate (view source)
Revision as of 20:11, 18 September 2022
, 20:11, 18 September 2022→Raster with Paint
== Preview cutting by opening the lid ==
== Preview cutting by opening the lid ==
== customize material settings ==
== Customize material settings ==
== Centre engraving ==
== Centre engraving ==
== Raster with Paint ==
== Raster with paint ==
As I’m sure you have seen, the makerspace has a variety of laser cut signs that have incorporated colour to draw your attention. Theses signs were created using the same laser cutters as the ones you use in the space for other operations. All you will need is some paint, a paint brush, material board, and of course the laser cutter. In this process you will have to run a raster job multiple times to remove a negative version of the desired file.
As I’m sure you have seen, the makerspace has a variety of laser cut signs that have incorporated colour to draw your attention. Theses signs were created using the same laser cutters as the ones you use in the space for other operations. All you will need is some paint, a paint brush, material board, and of course the laser cutter. In this process you will have to run a raster job multiple times to remove a negative version of the desired file.