Changes

== Preview cutting by opening the lid ==

== Preview cutting by opening the lid ==

== customize material settings ==

== Customize material settings ==

== Centre engraving ==

== Centre engraving ==

== Raster with Paint ==

== Raster with paint ==

As I’m sure you have seen, the makerspace has a variety of laser cut signs that have incorporated colour to draw your attention. Theses signs were created using the same laser cutters as the ones you use in the space for other operations. All you will need is some paint, a paint brush, material board, and of course the laser cutter. In this process you will have to run a raster job multiple times to remove a negative version of the desired file.

As I’m sure you have seen, the makerspace has a variety of laser cut signs that have incorporated colour to draw your attention. Theses signs were created using the same laser cutters as the ones you use in the space for other operations. All you will need is some paint, a paint brush, material board, and of course the laser cutter. In this process you will have to run a raster job multiple times to remove a negative version of the desired file.

## It is important that you do not remove the material from the laser so that the home position does not change between the raster passes.

## It is important that you do not remove the material from the laser so that the home position does not change between the raster passes.

# Now repeat step 5 until satisfaction (especially with MDF, you probably don't want to run it too many times so that it doesn't burn the material and become too dark).

# Now repeat step 5 until satisfaction (especially with MDF, you probably don't want to run it too many times so that it doesn't burn the material and become too dark).

== Boxes/3D assembly of laser cut parts ==

== Boxes/3D assembly of laser cut parts ==