Digital technologies/Laser cutting/Laser cutting- Beginner/Resources

From CEED Wiki
< Digital technologies‎ | Laser cutting‎ | Laser cutting- Beginner
Revision as of 21:09, 28 July 2022 by Jboud030 (talk | contribs) (Created page with "{{#lsth:Digital technologies/Laser cutting/Laser cutting- Beginner|Resources}}")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Some programs exist to simplify the laser cutting workflow. A few tools are listed below.

Makerbox

Makerbox is a web-based case generator for laser cutting. It allows for the creation of boxes with live hinges at the corners. Unfortunately, it only outputs .DXF or .DWG file formats and does not support the export of 3D CAD models for modifications in a 3D CAD software.

Slicer for Fusion 360

Slicer for Fusion 360 is a Fusion 360 add-on that allows for the conversion of 3D models into lasercuttable puzzle-like designs. This add-on can be extremely useful at making an inner-skeleton of large structures.

Laser Cutter Simulation

A simulator that shows all the steps to use the laser cutter in the Makerspace