Changes

Digital technologies/Arduino/Arduino- Beginner/Arduino troubleshooting (view source)

Revision as of 17:28, 28 July 2022

249 bytes removed , 17:28, 28 July 2022

→‎Libraries for Alternate Brand Arduino Boards

Line 4: Line 4: −

Arduino UNO make by a third-party company is not being registered/connecting to the Arduino board. Go to the manufacturers site and determine what libraries are missing and install them. For the board provided by the university you will need the following library:

+

<u>Arduino UNO make by a third-party company is not being registered/connecting to the Arduino board. Go to the manufacturers site and determine what libraries are missing and install them. For the board provided by the university you will need the following library:</u>

+

'''''NOT HOW YOU ADD THIS:'''''

http://www.wch-ic.com/downloads/CH341SER_ZIP.html

Line 12: Line 15:

* Select and download the driver appropriate for your operating system

* Add your library to the Arduino IDE

−

−

* Select the zip file that was previously downloaded. If the following error shows up:

−

~~[[File:Zip Library Error.png|center|frame|Error for an zip library not found.]]~~

* Restart the Arduino IDE and attempt to run Blink as shown [[here]] [INSERT LINK TO INSTRUCTION].

Akhan325

MakerRepo Staff, MakerRepo Volunteers

240

edits