Gallery of new files

This special page shows the last uploaded files.

Rotary Engraving Tool.jpg Mikael
17:35, 31 July 2024
600 × 800; 60 KB
Rotary Tool Setup (3).png Mikael
16:26, 31 July 2024
908 × 846; 1.56 MB
Rotary Tool Setup (2).png Mikael
16:19, 31 July 2024
908 × 846; 1.56 MB
Capture-d’écran-2022-06-21-à-14.48.52.png Mikael
21:38, 15 July 2024
294 × 168; 193 KB
Vivak Mold Shrinkage.png Mikael
20:14, 11 July 2024
766 × 681; 67 KB
Edges Fillets (1).png Mikael
03:02, 5 July 2024
963 × 479; 71 KB
Edges Fillets.png Mikael
20:15, 4 July 2024
966 × 537; 106 KB
Depth.png Mikael
17:54, 4 July 2024
958 × 420; 46 KB
Undercuts.png Mikael
16:05, 4 July 2024
970 × 336; 40 KB
Draft Angles.png Mikael
15:07, 4 July 2024
960 × 720; 40 KB
Draft Angle Comparison.png Mikael
14:53, 4 July 2024
2,037 × 662; 48 KB
Store correction menu.png Gmang049
20:09, 21 June 2024
729 × 278; 81 KB
Defining the machine area (line tracing).png Gmang049
20:07, 21 June 2024
746 × 241; 28 KB
Defining the machine area (define position).png Gmang049
20:07, 21 June 2024
753 × 238; 29 KB
Popup display for definition of machine area .png Gmang049
20:06, 21 June 2024
495 × 211; 29 KB
Defining the material area (left corner) .png Gmang049
20:04, 21 June 2024
747 × 304; 11 KB
Defining the material area (right corner) .png Gmang049
20:03, 21 June 2024
744 × 302; 9 KB
Click on.png Gmang049
20:01, 21 June 2024
37 × 41; 2 KB
Operate menu .png Gmang049
19:59, 21 June 2024
208 × 119; 10 KB
Material fastened .png Gmang049
19:58, 21 June 2024
580 × 237; 123 KB
Processing table with place based material.png Gmang049
19:40, 21 June 2024
577 × 223; 139 KB
Tool successfully inserted into the tool holder.png Gmang049
19:31, 21 June 2024
542 × 369; 222 KB
Insertion of tool into the tool holder.png Gmang049
19:29, 21 June 2024
524 × 311; 205 KB
Assigning tools in the correct tool holder position .png Gmang049
19:28, 21 June 2024
750 × 512; 148 KB
Tool magazine display.png Gmang049
19:25, 21 June 2024
749 × 520; 138 KB
Back of PCB design with the toolpath generated .png Gmang049
19:24, 21 June 2024
478 × 296; 48 KB
Front of PCB design with the toolpath generated .png Gmang049
19:24, 21 June 2024
456 × 279; 100 KB
Computation results display for back PCB.png Gmang049
19:09, 21 June 2024
675 × 606; 86 KB
Computation results display for front PCB.png Gmang049
19:08, 21 June 2024
678 × 621; 103 KB
Technology dialog display with pockets group .png Gmang049
19:05, 21 June 2024
533 × 217; 56 KB
Technology dialog display with isolate group.png Gmang049
19:03, 21 June 2024
468 × 284; 67 KB
Technology dialog display.png Gmang049
18:57, 21 June 2024
748 × 555; 150 KB
Back of PCB design with fiducials.png Gmang049
18:30, 21 June 2024
681 × 428; 56 KB
Front of PCB design with fiducials.png Gmang049
18:29, 21 June 2024
676 × 439; 108 KB
Back of PCB design with rubout drawn.png Gmang049
18:18, 21 June 2024
501 × 299; 36 KB
Front of PCB design with rubout drawn .png Gmang049
18:18, 21 June 2024
503 × 295; 82 KB
3D Rastering example.jpg Kaily
18:17, 21 June 2024
1,999 × 2,291; 1.08 MB
List of files to uncheck.png Gmang049
18:10, 21 June 2024
304 × 378; 74 KB
List of files and associated template.png Gmang049
18:10, 21 June 2024
720 × 376; 107 KB
Add file pop-up.png Gmang049
17:47, 21 June 2024
722 × 95; 16 KB
File Import menu.png Gmang049
17:44, 21 June 2024
279 × 332; 65 KB
Tool holder prompt.png Gmang049
17:24, 21 June 2024
584 × 120; 33 KB
Initial user interface.png Gmang049
17:23, 21 June 2024
939 × 561; 155 KB
New document creation.png Gmang049
17:22, 21 June 2024
938 × 531; 411 KB
Laser-cut-box 17.jpg Kaily
17:20, 21 June 2024
1,500 × 1,000; 40 KB
Initialization dialog.png Gmang049
17:19, 21 June 2024
797 × 481; 92 KB
Air compressor valve.png Gmang049
17:14, 21 June 2024
602 × 539; 350 KB
ON-OFF switch of the machine .png Gmang049
16:52, 21 June 2024
470 × 537; 197 KB
PCB internal routes.png Gmang049
15:47, 21 June 2024
557 × 250; 215 KB
PCB Composition.png Gmang049
15:42, 21 June 2024
618 × 236; 32 KB

Gallery of new files

Navigation menu

Search