Changes

16. The work has started. If the spindle motor has not run yet, a 2-minute warm-up phase is started.

16. The work has started. If the spindle motor has not run yet, a 2-minute warm-up phase is started.

17. If you are asked to define the machine area for milling-width checking (Figure 33), with the mouse '''click''' on an area in your material that will not affect your design (Figure 34) and '''click''' on [OK]. The machine will trace a line (Figure 35) and use the camera to measure the milling width area.[[File:Popup display for definition of machine area .png|border|center|400x200px|Popup display for definition of machine area|link=Special:FilePath/Popup_display_for_definition_of_machine_area_.png]]

17. If you are asked to define the machine area for milling-width checking (Figure 33), with the mouse '''click''' on an area in your material that will not affect your design (Figure 34) and '''click''' on [OK].  

 

The machine will trace a line (Figure 35) and use the camera to measure the milling width area.[[File:Popup display for definition of machine area .png|border|center|400x200px|Popup display for definition of machine area|link=Special:FilePath/Popup_display_for_definition_of_machine_area_.png]]

<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">Figure 33. Popup display for definition of machine area  

<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">Figure 33. Popup display for definition of machine area  

</div>

</div>

<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">Figure 34. Defining the machine area (define position)</div>

<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">Figure 34. Defining the machine area (define position)</div>

18. A line will be trace at that location

<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">Figure 35. Defining the machine area (line tracing)</div>

[[File: Store correction menu.png|border|center|500x200px|Store correction menu|link=Special:FilePath/Store_correction_menu.png]]

[[File:Defining the machine area (line tracing).png|border|center|500x200px|Defining the machine area (line tracing)|link=Special:FilePath/Defining_the_machine_area_(line_tracing).png]]

<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">Figure 36. Store correction menu</div>

<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">Figure 35. Defining the machine area (line tracing)</div>19. In the pop-up screen, '''Accept''' the focusing height.

# When it’s time to flip the material, '''remove''' the adhesive tape, '''lift''' the material, '''turn''' the material over along the vertical axis, '''fix it''' with adhesive tape again.  

<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">Figure 36. Store correction menu</div>21. When it’s time to flip the material, '''remove''' the adhesive tape, '''lift''' the material, '''turn''' the material over along the vertical axis, '''fix it''' with adhesive tape again.

# '''Click''' on [OK].  The machining view changes. The orientation of the layout is adapted to the orientation of the material. The side of the material to be processed is now the top side.  

22. '''Click''' on [OK].  The machining view changes. The orientation of the layout is adapted to the orientation of the material. The side of the material to be processed is now the top side.

# When the work is done, '''remove''' your cut PCB.  

23. When the work is done, '''remove''' your cut PCB.