MakerRepo Staff, MakerRepo Volunteers
872
edits
Changes
Digital technologies/Laser cutting/Laser cutting- Beginner/How to Laser Cut in the Makerspace/Zing (view source)
Revision as of 17:33, 13 June 2024
, 13 June→How to Laser cut?
#Prepare your file and select your material
#Prepare your file and select your material
#Move your file to the laser cutter computer (you may use one of the many USB keys owned by the Makerspace)
#Move your file to the laser cutter computer (you may use the USB key connected to the laptop or you can find one at the Makerspace)
#Turn on laser cutter setup
#Turn on laser cutter setup
#Prepare laser cutter
#Prepare laser cutter
There are three items to turn on:
There are three items to turn on:
*'''Laser cutter:''' Switch on left hand side at the back. When you turn on the laser cutter, let the head move around freely. Refrain from touching any other buttons until it has finished this process.
*'''Laser cutter:''' Switch on right hand side at the back. When you turn on the laser cutter, let the head move around freely. Refrain from touching any other buttons until it has finished this process.
*'''Air filter:''' Power button at bottom front.
*'''Air filter:''' Power button at bottom front.
*'''Air compressor:''' Switch Located on top left hand side
*'''Air compressor:''' Switch Located on top left hand side