Changes

* The Laser Cutter: Machine that will cut the material.

* The Laser Cutter: Machine that will cut the material.

*Laptop: The laptop is used to upload the design that need to be cut to the laser. It is also used to configure all the necessary setting of the laser. Note that the operating system running on the laptop is Windows 7.

*Laptop: The laptop is used to upload the design that need to be cut to the laser. It is also used to configure all the necessary setting of the laser. Note that the operating system running on the laptop is Windows 7.

*Air Filter: The filter should always be attached while performing a cut, the laser cutter is not to be used without the filter, this ensures that the air in the room is safe for users and limits potentially hazardous debris.[[File:Air Filter.jpg|thumb|Air Filter|link=Special:FilePath/Air_Filter.jpg]]

*Air Filter: The filter should always be attached while performing a cut, the laser cutter is not to be used without the filter, this ensures that the air in the room is safe for users and limits potentially hazardous debris.

*Air Compressor (compressed air): A steady flow of air to blow smoke and cutting residue away from the beam path and optics of a laser cutter. It's simple, but critical; without it, smoke can obscure and reflect the laser beam, foul lenses and mirrors, and severely degrade cut quality.[[File:Air Compressor.jpg|thumb|Air Compressor|link=Special:FilePath/Air_Compressor.jpg]]

*Air Compressor (compressed air): A steady flow of air to blow smoke and cutting residue away from the beam path and optics of a laser cutter. It's simple, but critical; without it, smoke can obscure and reflect the laser beam, foul lenses and mirrors, and severely degrade cut quality.

===Control Panel<ref name=":0">https://www.epiloglaser.com/assets/downloads/manuals/zing-manual-web.pdf</ref>===

===Control Panel<ref name=":0">https://www.epiloglaser.com/assets/downloads/manuals/zing-manual-web.pdf</ref>===