MakerRepo Administrators, MakerRepo Staff
795
edits
Changes
Digital technologies/Laser cutting/Laser cutting- Beginner (view source)
Revision as of 14:06, 12 June 2024
, 12 June→How to Laser Cut in the Makerspace
Before the using the laser cutter, please read the previous section on laser safety. All the information in this document can also be found in the [https://www.epiloglaser.com/downloads/pdf/mini_helix_4.22.10.pdf OWNER'S MANUAL FOR EPILOG MINI/HELIX.]
Before the using the laser cutter, please read the previous section on laser safety. All the information in this document can also be found in the [https://www.epiloglaser.com/downloads/pdf/mini_helix_4.22.10.pdf OWNER'S MANUAL FOR EPILOG MINI/HELIX.]
The following instructions are for the Mini and Helix machines, please see this page for instructions for the [[Digital technologies/Laser cutting/Laser cutting- Beginner/How to Laser Cut in the Makerspace/Zing|Zing]].
The laser cutting process is as follows:
The laser cutting process is as follows:
===Click print and select settings===
===Click print and select settings===
<youtube>kHQxDtO1LIc</youtube>
<youtube>kHQxDtO1LIc</youtube>
On the computer, click print. The print setup window will appear.
On the computer, click print. The print setup window will appear.