Changes

=== Libraries for Alternate Brand Arduino Boards ===

=== Drivers for Alternate Brand Arduino Boards ===

When using an Arduino for the first time, you may encounter some issues. This page will outline some of the most often issues seen, however, for more detail a search of the error in google will allow you to gain a further understanding of the problem at hand.

When using an Arduino for the first time, you may encounter some issues. This page will outline some of the most often issues seen, however, for more detail a search of the error in google will allow you to gain a further understanding of the problem at hand.

 

Arduino UNO make by a third-party company is not being registered/connecting to the Arduino board. Go to the manufacturers site and determine what libraries are missing and install them. For the board provided by the university you will need the following driver:

 

<u>Arduino UNO make by a third-party company is not being registered/connecting to the Arduino board. Go to the manufacturers site and determine what libraries are missing and install them. For the board provided by the university you will need the following library:</u>

 

 

http://www.wch-ic.com/downloads/CH341SER_ZIP.html

http://www.wch-ic.com/downloads/CH341SER_ZIP.html

Follow these steps:

'''Follow these steps:'''

* Select and download the driver appropriate for your operating system

* Select and download the driver appropriate for your operating system

* Add your library to the Arduino IDE

* Unzip the folder and run the installer!

 

 

 

* Restart the Arduino IDE and attempt to run Blink as shown [[here]] [INSERT LINK TO INSTRUCTION].

* Restart the Arduino IDE and attempt to run Blink as shown [[here]] [INSERT LINK TO INSTRUCTION].