Changes

#'''Speed:''' While rastering you can adjust the speed by pushing this button on using the arrow keys

#'''Speed:''' While rastering you can adjust the speed by pushing this button on using the arrow keys

[[File:Job Manager.png|center|thumb|469x469px|The Epilog Laser cutter dashboard|alt=]]

[[File:Job Manager.png|thumb|469x469px|The Epilog Laser cutter dashboard|alt=]]

===Properties===

===Properties===

The other way for the user to interact with the laser cutter is by setting up the laser properties for a cut.

The other way for the user to interact with the laser cutter is by setting up the laser properties for a cut.

##'''Frequency:''' Determines the number of laser pulses per inch of cut.Lower the frequency,the less heat being applied to the material. The frequency can range between 1 to 5000..Each materials have their own specific value and can be in “Suggested Material settings” which is located next  to the laser cutters in Makerspace.

##'''Frequency:''' Determines the number of laser pulses per inch of cut.Lower the frequency,the less heat being applied to the material. The frequency can range between 1 to 5000..Each materials have their own specific value and can be in “Suggested Material settings” which is located next  to the laser cutters in Makerspace.

[[File:Properties1.png|center|thumb|555x555px|Properties page]]

[[File:Properties1.png|thumb|555x555px|Properties page|alt=]]

==Material Settings==

==Material Settings==