makerrepo-staff
57
edits
Changes
no edit summary
| materials = PLA, NinjaFlex
| materials = PLA, NinjaFlex
|minLayerHeight=0.02|heatedBuildPlate=Yes|slicerLink=https://ultimaker.com/cura|slicerName=Cura}}
|minLayerHeight=0.02|heatedBuildPlate=Yes|slicerLink=https://ultimaker.com/cura|slicerName=Cura}}
These are the preset for the different nozzles on the Ultimaker 2+
'''Using 0.4 nozzle'''
{| class="wikitable"
|
|Fast print
|Normal
|High
|-
|Layer Height (mm)
|0.15
|0.10
|0.06
|-
|Top/Bottom Layer thickness (mm)
|0.75
|1.05
|1.05
|-
|Wall thickness (mm)
|0.7
|0.8
|0.72
|-
|Infill (%)
|18
|20
|22
|-
|Build Speed (mm/s)
|60
|50
|50
|-
|Travel Speed (mm/s)
|150
|120
|120
|}
'''Using 0.6 Nozzle'''
{| class="wikitable"
|
|Normal
|-
|Layer Height (mm)
|0.15
|-
|Top/Bottom Layer thickness (mm)
|1.2
|-
|Wall thickness (mm)
|1.59
|-
|Infill (%)
|20
|-
|Build Speed (mm/s)
|55
|-
|Travel Speed (mm/s)
|120
|}
'''Using 0.8 Nozzle'''
{| class="wikitable"
|
|Low
|-
|Layer Height (mm)
|0.2
|-
|Top/Bottom Layer thickness (mm)
|1.2
|-
|Wall thickness (mm)
|2.1
|-
|Infill (%)
|20
|-
|Build Speed (mm/s)
|40
|-
|Travel Speed (mm/s)
|120
|}
[[Category:3D Printers]]
[[Category:3D Printers]]