295
edits
Changes
Digital technologies/Laser cutting/Laser cutting- Beginner (view source)
Revision as of 23:25, 30 August 2021
, 23:25, 30 August 2021→Materials allowed and recommended settings
|-
|-
|Polyurethane base vinyl for adhering to shirts (50W laser)
|Polyurethane base vinyl for adhering to shirts (50W laser)
|<nowiki>10% | 80%</nowiki>
|<nowiki>11% | 80%</nowiki>
| rowspan="2" |N/A
| rowspan="2" |N/A
|300
|500
| rowspan="2" |The point is not to cut through the plastic sheeting under the vinyl. Make sure you invert your design file! If you want to cut through the plastic, boost the power to 20% on the 60W laser or 25% on the 50W laser.
| rowspan="2" |The point is not to cut through the plastic sheeting under the vinyl. Make sure you invert your design file! If you want to cut through the plastic, boost the power to 20% on the 60W laser or 25% on the 50W laser.
|-
|-
|Polyurethane base vinyl for adhering to shirts (60W laser)
|Polyurethane base vinyl for adhering to shirts (60W laser)
|<nowiki>12% | 80%</nowiki>
|<nowiki>8% | 80%</nowiki>
|500
|500
|}
|}