Elegoo Saturn2
Elegoo Saturn 2 8k
| Slicer | ChituBox |
|---|---|
| Build Volume | 218.88 × 123.12 × 250 mm |
| Compatible materials | Standard, ABS-like, rubber, etc |
| Minimum Layer Height | 0.01 mm |
| Heated Build Plate | No |
| More Information | Elegoo Saturn 2 8k |
Recommended settings
| Normal | |
| Layer Height (mm) | 0.05 |
| Bottom Layer count | 6 |
| Exposure time (s) | 2.5 |
| Bottom Exposure time (s) | 35 |
| Transition Layer count | 8 |
| Transition Type | Linear |
The Saturn 2 is a resin 3D printer available for use at the Richard l'Abbé Makerspace.
Starting the print
To start printing on the Saturn 2, use ChituBox to first slice the model. Then export to a USB drive and insert it into the right side of the printer. Finally use the touch screen to select your model.