Elegoo Saturn2

Revision as of 19:20, 4 June 2024 by Kaily (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Elegoo Saturn 2 8k
Elegoo saturn 2.jpg
Slicer ChituBox
Build Volume 218.88 × 123.12 × 250 mm
Compatible materials Standard, ABS-like, rubber, etc
Minimum Layer Height 0.01 mm
Heated Build Plate No
More Information Elegoo Saturn 2 8k

Recommended settings

Normal
Layer Height (mm) 0.05
Bottom Layer count 6
Exposure time (s) 2.5
Bottom Exposure time (s) 35
Transition Layer count 8
Transition Type Linear

The Saturn 2 is a resin 3D printer available for use at the Richard l'Abbé Makerspace.

Starting the print

To start printing on the Saturn 2, use ChituBox to first slice the model. Then export to a USB drive and insert it into the right side of the printer. Finally use the touch screen to select your model.