Markforged Mark Two

Revision as of 19:14, 4 June 2024 by Kaily (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Markforged Mark Two
Mk2.png
Slicer Eiger
Build Volume 320 × 132 × 154 mm
Compatible materials Nylon, Onyx, Carbon Fiber, Fiberglass, Kevlar
Minimum Layer Height 0.1 mm
Heated Build Plate No
More Information Markforged Mark Two

Recommended settings

Normal
Layer Height (mm) 0.15
Top/Bottom Layer thickness (mm) 1.2
Wall thickness (mm) 1.59
Infill (%) 20
Build Speed (mm/s) 55
Travel Speed (mm/s) 120

Starting the print

To start a print on the Mark 2, go to the white computer beside the door and start up Eiger. After importing your files, slice and upload them to the printer.