FLsun v400
| Slicer | Cura |
|---|---|
| Build Volume | 300 × 300 × 410 mm |
| Compatible materials | PLA, ABS, Flexible, etc |
| Minimum Layer Height | 0.05 mm |
| Heated Build Plate | Yes |
| More Information | FLsun v400 |
Recommended settings
| Normal | |
| Layer Height (mm) | 0.2 |
| Top/Bottom Layer thickness (mm) | 1.2 |
| Wall thickness (mm) | 1.2 |
| Infill (%) | 20 |
| Build Speed (mm/s) | 400 |
| Travel Speed (mm/s) | 500 |
The FLsun v400 is a large-volume, very quick delta 3D printer available for use at the Richard l'Abbé Makerspace.