Ultimaker 2+

Ultimaker 2+

Slicer	Cura
Build Volume	223 × 223 × 205 mm
Compatible materials	PLA, ABS, Flexible
Minimum Layer Height	0.06 mm
Heated Build Plate	Yes
More Information	[{{{moreInformation}}} Ultimaker 2+]

These are the presets for the different nozzles on the Ultimaker 2+.

Using 0.4 nozzle

	Fast print	Normal	High
Layer Height (mm)	0.15	0.10	0.06
Top/Bottom Layer thickness (mm)	0.75	1.05	1.05
Wall thickness (mm)	0.7	0.8	0.72
Infill (%)	18	20	22
Build Speed (mm/s)	60	50	50
Travel Speed (mm/s)	150	120	120

Using 0.6 Nozzle

	Normal
Layer Height (mm)	0.15
Top/Bottom Layer thickness (mm)	1.2
Wall thickness (mm)	1.59
Infill (%)	20
Build Speed (mm/s)	55
Travel Speed (mm/s)	120

Using 0.8 Nozzle

	Low
Layer Height (mm)	0.2
Top/Bottom Layer thickness (mm)	1.2
Wall thickness (mm)	2.1
Infill (%)	20
Build Speed (mm/s)	40
Travel Speed (mm/s)	120