Difference between revisions of "Elegoo Saturn2"
Jump to navigation
Jump to search
(Created page with "{{PrinterInfobox | name = Elegoo Saturn 2 8k | image = elegoo saturn 2.jpg | slicerName = ChituBox | slicerLink = https://www.chitubox.com/en/download/chitubox-free | buildVol...") |
|||
| Line 14: | Line 14: | ||
| moreInformation = https://en.wiki.makerepo.com/wiki/Elegoo_Saturn2 | | moreInformation = https://en.wiki.makerepo.com/wiki/Elegoo_Saturn2 | ||
}} | }} | ||
| − | + | ==Recommended settings== | |
| + | {| class="wikitable" | ||
| + | | | ||
| + | |Normal | ||
| + | |- | ||
| + | |Layer Height (mm) | ||
| + | |0.15 | ||
| + | |- | ||
| + | |Top/Bottom Layer thickness (mm) | ||
| + | |1.2 | ||
| + | |- | ||
| + | |Wall thickness (mm) | ||
| + | |1.59 | ||
| + | |- | ||
| + | |Infill (%) | ||
| + | |20 | ||
| + | |- | ||
| + | |Build Speed (mm/s) | ||
| + | |55 | ||
| + | |- | ||
| + | |Travel Speed (mm/s) | ||
| + | |120 | ||
| + | |} | ||
The Saturn 2 is a resin 3D printer available for use at the Richard l'Abbé Makerspace. | The Saturn 2 is a resin 3D printer available for use at the Richard l'Abbé Makerspace. | ||
[[Category:3D Printers]] | [[Category:3D Printers]] | ||
Revision as of 19:16, 4 June 2024
Elegoo Saturn 2 8k
| Slicer | ChituBox |
|---|---|
| Build Volume | 218.88 × 123.12 × 250 mm |
| Compatible materials | Standard, ABS-like, rubber, etc |
| Minimum Layer Height | 0.01 mm |
| Heated Build Plate | No |
| More Information | Elegoo Saturn 2 8k |
Recommended settings
| Normal | |
| Layer Height (mm) | 0.15 |
| Top/Bottom Layer thickness (mm) | 1.2 |
| Wall thickness (mm) | 1.59 |
| Infill (%) | 20 |
| Build Speed (mm/s) | 55 |
| Travel Speed (mm/s) | 120 |
The Saturn 2 is a resin 3D printer available for use at the Richard l'Abbé Makerspace.