Difference between revisions of "Flsun v400"
Jump to navigation
Jump to search
| Line 20: | Line 20: | ||
|- | |- | ||
|Layer Height (mm) | |Layer Height (mm) | ||
| − | |0. | + | |0.2 |
|- | |- | ||
|Top/Bottom Layer thickness (mm) | |Top/Bottom Layer thickness (mm) | ||
| Line 26: | Line 26: | ||
|- | |- | ||
|Wall thickness (mm) | |Wall thickness (mm) | ||
| − | |1. | + | |1.2 |
|- | |- | ||
|Infill (%) | |Infill (%) | ||
| Line 32: | Line 32: | ||
|- | |- | ||
|Build Speed (mm/s) | |Build Speed (mm/s) | ||
| − | | | + | |400 |
|- | |- | ||
|Travel Speed (mm/s) | |Travel Speed (mm/s) | ||
| − | | | + | |500 |
|} | |} | ||
The FLsun v400 is a large-volume, very quick delta 3D printer available for use at the Richard l'Abbé Makerspace. | The FLsun v400 is a large-volume, very quick delta 3D printer available for use at the Richard l'Abbé Makerspace. | ||
[[Category:3D Printers]] | [[Category:3D Printers]] | ||
Revision as of 19:04, 4 June 2024
FLsun v400
| Slicer | Cura |
|---|---|
| Build Volume | 300 × 300 × 410 mm |
| Compatible materials | PLA, ABS, Flexible, etc |
| Minimum Layer Height | 0.05 mm |
| Heated Build Plate | Yes |
| More Information | FLsun v400 |
| Normal | |
| Layer Height (mm) | 0.2 |
| Top/Bottom Layer thickness (mm) | 1.2 |
| Wall thickness (mm) | 1.2 |
| Infill (%) | 20 |
| Build Speed (mm/s) | 400 |
| Travel Speed (mm/s) | 500 |
The FLsun v400 is a large-volume, very quick delta 3D printer available for use at the Richard l'Abbé Makerspace.