Difference between revisions of "Flsun v400"
Jump to navigation
Jump to search
| Line 15: | Line 15: | ||
}} | }} | ||
| + | {| class="wikitable" | ||
| + | | | ||
| + | |Normal | ||
| + | |- | ||
| + | |Layer Height (mm) | ||
| + | |0.15 | ||
| + | |- | ||
| + | |Top/Bottom Layer thickness (mm) | ||
| + | |1.2 | ||
| + | |- | ||
| + | |Wall thickness (mm) | ||
| + | |1.59 | ||
| + | |- | ||
| + | |Infill (%) | ||
| + | |20 | ||
| + | |- | ||
| + | |Build Speed (mm/s) | ||
| + | |55 | ||
| + | |- | ||
| + | |Travel Speed (mm/s) | ||
| + | |120 | ||
| + | |} | ||
The FLsun v400 is a large-volume, very quick delta 3D printer available for use at the Richard l'Abbé Makerspace. | The FLsun v400 is a large-volume, very quick delta 3D printer available for use at the Richard l'Abbé Makerspace. | ||
[[Category:3D Printers]] | [[Category:3D Printers]] | ||
Revision as of 19:03, 4 June 2024
FLsun v400
| Slicer | Cura |
|---|---|
| Build Volume | 300 × 300 × 410 mm |
| Compatible materials | PLA, ABS, Flexible, etc |
| Minimum Layer Height | 0.05 mm |
| Heated Build Plate | Yes |
| More Information | FLsun v400 |
| Normal | |
| Layer Height (mm) | 0.15 |
| Top/Bottom Layer thickness (mm) | 1.2 |
| Wall thickness (mm) | 1.59 |
| Infill (%) | 20 |
| Build Speed (mm/s) | 55 |
| Travel Speed (mm/s) | 120 |
The FLsun v400 is a large-volume, very quick delta 3D printer available for use at the Richard l'Abbé Makerspace.