Raise3D N2 Plus: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 14: | Line 14: | ||
|recommendedSettings=https://en.wiki.makerepo.com/wiki/Raise3D_N2_Plus}} | |recommendedSettings=https://en.wiki.makerepo.com/wiki/Raise3D_N2_Plus}} | ||
==Recommended settings== | |||
{| class="wikitable" | |||
| | |||
|Low print | |||
|Normal | |||
|High | |||
|- | |||
|Layer Height (mm) | |||
|0.15 | |||
|0.10 | |||
|0.06 | |||
|- | |||
|Top/Bottom Layer thickness (mm) | |||
|0.75 | |||
|1.05 | |||
|1.05 | |||
|- | |||
|Wall thickness (mm) | |||
|0.7 | |||
|0.8 | |||
|0.72 | |||
|- | |||
|Infill (%) | |||
|18 | |||
|20 | |||
|22 | |||
|- | |||
|Build Speed (mm/s) | |||
|60 | |||
|50 | |||
|50 | |||
|- | |||
|Travel Speed (mm/s) | |||
|150 | |||
|120 | |||
|120 | |||
|} | |||
[[Category:3D Printers]] | [[Category:3D Printers]] | ||
Revision as of 18:49, 4 June 2024
Raise3D N2 Plus
| Slicer | ideaMaker |
|---|---|
| Build Volume | 305 × 305 × 605 mm |
| Compatible materials | PLA, ABS, PVA, Flexible |
| Minimum Layer Height | 0.01 mm |
| Heated Build Plate | Yes |
| More Information | [{{{moreInformation}}} Raise3D N2 Plus] |
Recommended settings
| Low print | Normal | High | |
| Layer Height (mm) | 0.15 | 0.10 | 0.06 |
| Top/Bottom Layer thickness (mm) | 0.75 | 1.05 | 1.05 |
| Wall thickness (mm) | 0.7 | 0.8 | 0.72 |
| Infill (%) | 18 | 20 | 22 |
| Build Speed (mm/s) | 60 | 50 | 50 |
| Travel Speed (mm/s) | 150 | 120 | 120 |