Difference between revisions of "Ultimaker 3"

From CEED Wiki
Jump to navigation Jump to search
m
Line 9: Line 9:
 
|float=right|buildWidth=215|buildDepth=215|buildHeight=200|recommendedSettings=https://en.wiki.makerepo.com/wiki/Ultimaker_3}}
 
|float=right|buildWidth=215|buildDepth=215|buildHeight=200|recommendedSettings=https://en.wiki.makerepo.com/wiki/Ultimaker_3}}
  
Ultimaker 3
+
== Recommended Settings ==
 +
These are the presets for the different nozzles on the Ultimaker 3.
 +
 
 +
'''Using 0.4 nozzle'''
 +
{| class="wikitable"
 +
|
 +
|Low print
 +
|Normal
 +
|High
 +
|-
 +
|Layer Height (mm)
 +
|0.15
 +
|0.10
 +
|0.06
 +
|-
 +
|Top/Bottom Layer thickness (mm)
 +
|0.75
 +
|1.05
 +
|1.05
 +
|-
 +
|Wall thickness (mm)
 +
|0.7
 +
|0.8
 +
|0.72
 +
|-
 +
|Infill (%)
 +
|18
 +
|20
 +
|22
 +
|-
 +
|Build Speed (mm/s)
 +
|60
 +
|50
 +
|50
 +
|-
 +
|Travel Speed (mm/s)
 +
|150
 +
|120
 +
|120
 +
|}
 
[[Category:3D Printers]]
 
[[Category:3D Printers]]

Revision as of 18:38, 4 June 2024

Ultimaker 3
Ultimaker3.png
Slicer Cura
Build Volume 215 × 215 × 200 mm
Compatible materials PLA, PVA, Flexible
Minimum Layer Height 0.02 mm
Heated Build Plate Yes
More Information [{{{moreInformation}}} Ultimaker 3]

Recommended Settings

These are the presets for the different nozzles on the Ultimaker 3.

Using 0.4 nozzle

Low print Normal High
Layer Height (mm) 0.15 0.10 0.06
Top/Bottom Layer thickness (mm) 0.75 1.05 1.05
Wall thickness (mm) 0.7 0.8 0.72
Infill (%) 18 20 22
Build Speed (mm/s) 60 50 50
Travel Speed (mm/s) 150 120 120