Arduino UNO make by a third-party company is not being registered/connecting to the Arduino board. Go to the manufacturers site and determine what libraries are missing and install them. For the board provided by the university you will need the following library:
<u>Arduino UNO make by a third-party company is not being registered/connecting to the Arduino board. Go to the manufacturers site and determine what libraries are missing and install them. For the board provided by the university you will need the following library:</u>
'''''NOT HOW YOU ADD THIS:'''''
http://www.wch-ic.com/downloads/CH341SER_ZIP.html
http://www.wch-ic.com/downloads/CH341SER_ZIP.html
Line 12:
Line 15:
* Select and download the driver appropriate for your operating system
* Select and download the driver appropriate for your operating system
* Add your library to the Arduino IDE
* Add your library to the Arduino IDE
[[File:Arduino IDE for library Installation.png|thumb|502x502px|How to add a zip library in the Arduino IDE|alt=|center]]
* Select the zip file that was previously downloaded. If the following error shows up:
[[File:Zip Library Error.png|center|frame|Error for an zip library not found.]]
* Restart the Arduino IDE and attempt to run Blink as shown [[here]] [INSERT LINK TO INSTRUCTION].
* Restart the Arduino IDE and attempt to run Blink as shown [[here]] [INSERT LINK TO INSTRUCTION].
Revision as of 17:28, 28 July 2022
Libraries for Alternate Brand Arduino Boards
When using an Arduino for the first time, you may encounter some issues. This page will outline some of the most often issues seen, however, for more detail a search of the error in google will allow you to gain a further understanding of the problem at hand.
Arduino UNO make by a third-party company is not being registered/connecting to the Arduino board. Go to the manufacturers site and determine what libraries are missing and install them. For the board provided by the university you will need the following library:
