Difference between revisions of "Ultimaker 2+"
Jump to navigation
Jump to search
m |
Meganmahoney (talk | contribs) |
||
| Line 5: | Line 5: | ||
| materials = PLA, NinjaFlex | | materials = PLA, NinjaFlex | ||
|minLayerHeight=0.02|heatedBuildPlate=Yes|slicerLink=https://ultimaker.com/cura|slicerName=Cura}} | |minLayerHeight=0.02|heatedBuildPlate=Yes|slicerLink=https://ultimaker.com/cura|slicerName=Cura}} | ||
| − | + | These are the preset for the different nozzles on the Ultimaker 2+ | |
| + | |||
| + | '''Using 0.4 nozzle''' | ||
| + | {| class="wikitable" | ||
| + | | | ||
| + | |Fast print | ||
| + | |Normal | ||
| + | |High | ||
| + | |- | ||
| + | |Layer Height (mm) | ||
| + | |0.15 | ||
| + | |0.10 | ||
| + | |0.06 | ||
| + | |- | ||
| + | |Top/Bottom Layer thickness (mm) | ||
| + | |0.75 | ||
| + | |1.05 | ||
| + | |1.05 | ||
| + | |- | ||
| + | |Wall thickness (mm) | ||
| + | |0.7 | ||
| + | |0.8 | ||
| + | |0.72 | ||
| + | |- | ||
| + | |Infill (%) | ||
| + | |18 | ||
| + | |20 | ||
| + | |22 | ||
| + | |- | ||
| + | |Build Speed (mm/s) | ||
| + | |60 | ||
| + | |50 | ||
| + | |50 | ||
| + | |- | ||
| + | |Travel Speed (mm/s) | ||
| + | |150 | ||
| + | |120 | ||
| + | |120 | ||
| + | |} | ||
| + | '''Using 0.6 Nozzle''' | ||
| + | {| class="wikitable" | ||
| + | | | ||
| + | |Normal | ||
| + | |- | ||
| + | |Layer Height (mm) | ||
| + | |0.15 | ||
| + | |- | ||
| + | |Top/Bottom Layer thickness (mm) | ||
| + | |1.2 | ||
| + | |- | ||
| + | |Wall thickness (mm) | ||
| + | |1.59 | ||
| + | |- | ||
| + | |Infill (%) | ||
| + | |20 | ||
| + | |- | ||
| + | |Build Speed (mm/s) | ||
| + | |55 | ||
| + | |- | ||
| + | |Travel Speed (mm/s) | ||
| + | |120 | ||
| + | |} | ||
| + | '''Using 0.8 Nozzle''' | ||
| + | {| class="wikitable" | ||
| + | | | ||
| + | |Low | ||
| + | |- | ||
| + | |Layer Height (mm) | ||
| + | |0.2 | ||
| + | |- | ||
| + | |Top/Bottom Layer thickness (mm) | ||
| + | |1.2 | ||
| + | |- | ||
| + | |Wall thickness (mm) | ||
| + | |2.1 | ||
| + | |- | ||
| + | |Infill (%) | ||
| + | |20 | ||
| + | |- | ||
| + | |Build Speed (mm/s) | ||
| + | |40 | ||
| + | |- | ||
| + | |Travel Speed (mm/s) | ||
| + | |120 | ||
| + | |} | ||
[[Category:3D Printers]] | [[Category:3D Printers]] | ||
Revision as of 16:24, 4 March 2019
Ultimaker 2+
| Slicer | Cura |
|---|---|
| Build Volume | {{{buildWidth}}} × {{{buildDepth}}} × {{{buildHeight}}} mm |
| Compatible materials | PLA, NinjaFlex |
| Minimum Layer Height | 0.02 mm |
| Heated Build Plate | Yes |
| More Information | [{{{moreInformation}}} Ultimaker 2+] |
These are the preset for the different nozzles on the Ultimaker 2+
Using 0.4 nozzle
| Fast print | Normal | High | |
| Layer Height (mm) | 0.15 | 0.10 | 0.06 |
| Top/Bottom Layer thickness (mm) | 0.75 | 1.05 | 1.05 |
| Wall thickness (mm) | 0.7 | 0.8 | 0.72 |
| Infill (%) | 18 | 20 | 22 |
| Build Speed (mm/s) | 60 | 50 | 50 |
| Travel Speed (mm/s) | 150 | 120 | 120 |
Using 0.6 Nozzle
| Normal | |
| Layer Height (mm) | 0.15 |
| Top/Bottom Layer thickness (mm) | 1.2 |
| Wall thickness (mm) | 1.59 |
| Infill (%) | 20 |
| Build Speed (mm/s) | 55 |
| Travel Speed (mm/s) | 120 |
Using 0.8 Nozzle
| Low | |
| Layer Height (mm) | 0.2 |
| Top/Bottom Layer thickness (mm) | 1.2 |
| Wall thickness (mm) | 2.1 |
| Infill (%) | 20 |
| Build Speed (mm/s) | 40 |
| Travel Speed (mm/s) | 120 |