MakerRepo Administrators, MakerRepo Staff
527
edits
Changes
Jump to navigation
Jump to search
Line 20:
Line 20: − + − + − + − + − + − + − + − + − + − + − + + + +
no edit summary
|-
|-
|Layer Height (mm)
|Layer Height (mm)
|0.15
|0.05
|-
|-
|Top/Bottom Layer thickness (mm)
|Bottom Layer count
|1.2
|6
|-
|-
|Wall thickness (mm)
|Exposure time (s)
|1.59
|2.5
|-
|-
|Infill (%)
|Bottom Exposure time (s)
|20
|35
|-
|-
|Build Speed (mm/s)
|Transition Layer count
|55
|8
|-
|-
|Travel Speed (mm/s)
|Transition Type
|120
|Linear
|}
|}
The Saturn 2 is a resin 3D printer available for use at the Richard l'Abbé Makerspace.
The Saturn 2 is a resin 3D printer available for use at the Richard l'Abbé Makerspace.
== Starting the print ==
To start printing on the Saturn 2, use ChituBox to first slice the model. Then export to a USB drive and insert it into the right side of the printer. Finally use the touch screen to select your model.
[[Category:3D Printers]]
[[Category:3D Printers]]