Difference between revisions of "Raise3D N2 Plus"

From CEED Wiki
Jump to navigation Jump to search
Line 8: Line 8:
 
| minLayerHeight = 0.01
 
| minLayerHeight = 0.01
 
| heatedBuildPlate = Yes
 
| heatedBuildPlate = Yes
|float=right|buildWidth=305|buildDepth=305|buildHeight=605|recommendedSettings=https://en.wiki.makerepo.com/wiki/Raise3D_N2_Plus}}
+
|float=right
 +
|buildWidth=305
 +
|buildDepth=305
 +
|buildHeight=605
 +
|recommendedSettings=https://en.wiki.makerepo.com/wiki/Raise3D_N2_Plus}}
  
 
The Raise3D N2 Plus is a large-volume, low-cost 3D printer available for use at the Richard l'Abbé Makerspace.
 
The Raise3D N2 Plus is a large-volume, low-cost 3D printer available for use at the Richard l'Abbé Makerspace.
 
[[Category:3D Printers]]
 
[[Category:3D Printers]]

Revision as of 20:43, 21 July 2023

Raise3D N2 Plus
Raise3D N2 Plus.png
Slicer ideaMaker
Build Volume 305 × 305 × 605 mm
Compatible materials PLA, ABS, PVA, Flexible
Minimum Layer Height 0.01 mm
Heated Build Plate Yes
More Information [{{{moreInformation}}} Raise3D N2 Plus]

The Raise3D N2 Plus is a large-volume, low-cost 3D printer available for use at the Richard l'Abbé Makerspace.