MakerRepo Staff, MakerRepo Volunteers
532
edits
Changes
Digital technologies/Laser cutting/Laser cutting- Beginner/How to Laser Cut in the Makerspace/Zing (view source)
Revision as of 17:11, 13 June 2024
, 13 June→Control Panelhttps://www.epiloglaser.com/assets/downloads/manuals/zing-manual-web.pdf
==Control Panel<ref name=":0">https://www.epiloglaser.com/assets/downloads/manuals/zing-manual-web.pdf</ref>==
==Control Panel<ref name=":0">https://www.epiloglaser.com/assets/downloads/manuals/zing-manual-web.pdf</ref>==
One way for the user to interact with the laser is by using the control panel. The list below describes the properties of each button found in the laser cutter control panel.
[[File:ControlPanel.png|thumb|Control Panel]]
[[File:ControlPanelZing.jpg|thumb|Control Panel on Epilog Zing]]One way for the user to interact with the laser is by using the control panel. The list below describes the properties of each button found in the laser cutter control panel.
#'''Go:''' Start or stop a job or process
#'''Go:''' Start or stop a job or process
#'''Pause:''' Stop a process. When rastering ,it will stop right away. When vectoring, it will only stop once it has finished its current path
#'''Pause:''' Stop a process. When rastering ,it will stop right away. When vectoring, it will only stop once it has finished its current path