Difference between revisions of "Raise3D N2 Plus"

From CEED Wiki
Jump to navigation Jump to search
Line 14: Line 14:
 
|recommendedSettings=https://en.wiki.makerepo.com/wiki/Raise3D_N2_Plus}}
 
|recommendedSettings=https://en.wiki.makerepo.com/wiki/Raise3D_N2_Plus}}
  
−
The Raise3D N2 Plus is a large-volume, low-cost 3D printer available for use at the Richard l'Abbé Makerspace.
+
==Recommended settings==
 +
{| class="wikitable"
 +
|
 +
|Low print
 +
|Normal
 +
|High
 +
|-
 +
|Layer Height (mm)
 +
|0.15
 +
|0.10
 +
|0.06
 +
|-
 +
|Top/Bottom Layer thickness (mm)
 +
|0.75
 +
|1.05
 +
|1.05
 +
|-
 +
|Wall thickness (mm)
 +
|0.7
 +
|0.8
 +
|0.72
 +
|-
 +
|Infill (%)
 +
|18
 +
|20
 +
|22
 +
|-
 +
|Build Speed (mm/s)
 +
|60
 +
|50
 +
|50
 +
|-
 +
|Travel Speed (mm/s)
 +
|150
 +
|120
 +
|120
 +
|}
 
[[Category:3D Printers]]
 
[[Category:3D Printers]]

Revision as of 18:49, 4 June 2024

Raise3D N2 Plus
Raise3D N2 Plus.png
Slicer ideaMaker
Build Volume 305 × 305 × 605 mm
Compatible materials PLA, ABS, PVA, Flexible
Minimum Layer Height 0.01 mm
Heated Build Plate Yes
More Information [{{{moreInformation}}} Raise3D N2 Plus]

Recommended settings

Low print Normal High
Layer Height (mm) 0.15 0.10 0.06
Top/Bottom Layer thickness (mm) 0.75 1.05 1.05
Wall thickness (mm) 0.7 0.8 0.72
Infill (%) 18 20 22
Build Speed (mm/s) 60 50 50
Travel Speed (mm/s) 150 120 120
Retrieved from "https://en.wiki.makerepo.com/mediawiki/index.php?title=Raise3D_N2_Plus&oldid=1873"