Difference between revisions of "Digital technologies/Soldering/Soldering- Beginner"

From CEED Wiki
Jump to navigation Jump to search
Line 92: Line 92:
  
 
==How to Solder==
 
==How to Solder==
 +
'''Principles of Soldering:'''
  
=== Materials ===
 
''What is needed:''
 
*Soldering iron
 
*Solder (preferably lead free)
 
*Components you want to solder
 
*Vent fan
 
 
''Optional items:''
 
 
*Solder wick
 
*De-soldering tool
 
*Soldering mat
 
 
=== Set up ===
 
To begin soldering gather all of the equipment and components necessary. And begin by determining which connection needs to be made and how you plan on making it. Next we will set up the Iron and station; Ensure you have a working soldering iron and stand, brass wool/wet sponge, solder, and (optional) flux and tip tinner. Turn on the iron and select the appropriate temperature for the iron:
 
 
* 700F (370C) for through hole components and wires
 
* 600F (315C) for surface mount components
 
* Higher temperatures can damage
 
 
==== How to Strip a Wire: ====
 
Soldering two wires is the best way to practice soldering at the very beginning. There are two types of wire, either stranded or solid core. Both have a metal core wrapped in a plastic covering. To see the metal, you need to expose the core by removing the plastic. This can be done using wire strippers or wire cutters.
 
 
===== Wire Stripping: =====
 
When using wire strippers - place the wire in the slot written to be for the wire gauge you’re using and gently press around the tubing. You want to be sure to avoid cutting through the core of the wire since the goal is to expose the core. Once the perimeter of the covering has been cut through you will then remove it by slipping it off the core as seen below.
 
[[File:Wss.png|center|thumb|528x528px|Cited from: https://www.bobvila.com/articles/how-to-strip-wire/]]
 
 
=== Procedure ===
 
 
==== Principles of Soldering: ====
 
 
<u>''Tip Tinning''</u>
 
<u>''Tip Tinning''</u>
  
Line 148: Line 119:
  
 
==== Soldering Wires ====
 
==== Soldering Wires ====
 +
 +
=== Set up ===
 +
To begin soldering gather all of the equipment and components necessary. And begin by determining which connection needs to be made and how you plan on making it. Next we will set up the Iron and station; Ensure you have a working soldering iron and stand, brass wool/wet sponge, solder, and (optional) flux and tip tinner. Turn on the iron and select the appropriate temperature for the iron:
 +
 +
* 700F (370C) for through hole components and wires
 +
* 600F (315C) for surface mount components
 +
* Higher temperatures can damage
 +
<u>'''''Materials''':''</u>
 +
 +
''What is needed:''
 +
*Soldering iron
 +
*Solder (preferably lead free)
 +
*Components you want to solder
 +
*Vent fan
 +
 +
''Optional items:''
 +
 +
*Solder wick
 +
*De-soldering tool
 +
*Soldering mat
 +
 +
==== How to Strip a Wire: ====
 +
Soldering two wires is the best way to practice soldering at the very beginning. There are two types of wire, either stranded or solid core. Both have a metal core wrapped in a plastic covering. To see the metal, you need to expose the core by removing the plastic. This can be done using wire strippers or wire cutters. When using wire strippers - place the wire in the slot written to be for the wire gauge you’re using and gently press around the tubing. You want to be sure to avoid cutting through the core of the wire since the goal is to expose the core. Once the perimeter of the covering has been cut through you will then remove it by slipping it off the core as seen below.[[File:Wss.png|center|thumb|528x528px|Cited from: https://www.bobvila.com/articles/how-to-strip-wire/]]
 +
 +
=== Procedure ===
  
 
#Grab a few wires, strip 1 cm off each end and bend each end in a U shape.
 
#Grab a few wires, strip 1 cm off each end and bend each end in a U shape.

Revision as of 16:48, 21 July 2022

What is Soldering?

Soldering is a process often used when working with electronics. It consists of melting one metal to connect two or more metal pieces. This connection not only creates an electrical connection, but it also secures a component in place.

Safety When Soldering

  • When Soldering be sure to wet the sponge being used inorder to avoid burning it or ruining the tip of the iron
  • Don’t leave the iron unsupervised and on
  • Long exposure of the iron to the PCB and other electronic components will lead to them burning
  • Don’t touch the tip or neck of the iron
  • Allow the solder and board to cool before handling

Types of Soldering

Through-hole-technology (THT)

  • Through-hole-technology (THT) soldering means to solder components that have leads that will go through holes inside a protoboard or PCB.

Surface mount device (SMD)

  • Surface mount (SMD) soldering is when you will solder a component to the surface of a PCB. This type of soldering is typically used for smaller components and chips.

Equipment and Materials

Types of boards

Breadboards

Breadboards are used to build temporary circuits, they allow you to plug wires into the board and prototype circuits. The holes in a breadboard are typically connected in 2 ways: the (+) bars running down the board are connected vertically and the (-) are connected in a similar way. Each horizontal row of 5 dots is connected together. The part in the middle of the board is where the connection breaks.

Protoboards

A protoboard (also known as a perfboard or DOT PCB) is a PCB with pre-drilled holes that have square or circular copper pads. This board allows you to insert components into the holes to secure them and then the holes can be bridged together in order to connect them together and create a circuit.

PCBs

PCBs or Printed Circuit Boards are boards with connection pathways printed into the board. These boards are typically used in later stages of prototyping as there isn’t as much flexibility once the board is printed.

Tools

  • Soldering Iron

This is the iron used to manipulate the solder onto the board or circuit.

  • Exhaust

Melting the solder often results in the production of fumes, these fumes can be toxic with extended exposure and so, soldering if often done in areas with good ventilation or in the presence of an exhaust system/fan.

  • Solder

The material used to create joints is called solder, this is often sold in rolls of wire, there are different forms of solder that can vary in dimension. Always be sure to use lead free solder as the alternative is toxic. When purchasing solder for circuits, ensure that it isn’t plumbing solder.

  • Flux

Flux is a material used to aid in soldering, this chemical removes the oxides on the surfaces of the metals being soldered and allows the solder to flow more uniformly on the joint and components.

  • Tip tinner

This chemical aids in cleaning the tip of the soldering iron when it is blackened or very oxidized and helps to solder with far greater ease. This material is great if the iron won’t clean with regular brass wool or sponge.

  • Tweezers and helping hands

Often with smaller components and in the presence of a more complicated circuit, using additional equipment like helping hands or tweezers can help the process. These essentially aid in manipulating the components and keeping them in a specific position.

  • Wire Strippers

Wire strippers are used to expose the internal wire and remove the plastic insulation to allow you to create connections between different wires.

  • Brass Wool

A brass wool can be use to help clean oxidization off of the soldering iron - this aids in adhesion between the soldering iron and the solder.

  • Wet Sponge

A wet sponge can be used to help clean the iron while soldering.

Tool Maintenance

Soldering Tools

  • Keep the soldering iron tip clean by removing the oxidization via the brass wool/sponge.
  • Be sure to wait until the iron cools before storing it, in order to avoid burring or melting any thing else in its vicinity


How to Solder

Principles of Soldering:

Tip Tinning

Tip tinning is a process where you apply a layer of solder to the tip of a soldering iron - this allows for better heat transfer between the soldering iron and solder which improves adhesion and your ability to manipulate the solder.

Heating the Components

When soldering components, be sure to heat the component to be hot enough to melt the solder and not the solder itself - this allows for better adhesion between the component and solder, the goal is to ensure that the connection between the two is as secure as it can be.

Using the Brass Wool

Using the mesh sponge helps in removing oxide from the soldering iron and is far more efficient at cleaning the iron between uses than a wet sponge.

Using a Wet Sponge

Using a wet sponge while soldering helps in cleaning off excess solder off of the iron whilst soldering.

Ventilation

Melting solder will produce fumes and so you must always solder in well ventilated areas, this goes especially for any solder that contains lead.

Lead Free Solder

Always try to use lead free solder as lead is toxic and its use can lead to health complications.

Soldering Wires

Set up

To begin soldering gather all of the equipment and components necessary. And begin by determining which connection needs to be made and how you plan on making it. Next we will set up the Iron and station; Ensure you have a working soldering iron and stand, brass wool/wet sponge, solder, and (optional) flux and tip tinner. Turn on the iron and select the appropriate temperature for the iron:

  • 700F (370C) for through hole components and wires
  • 600F (315C) for surface mount components
  • Higher temperatures can damage

Materials:

What is needed:

  • Soldering iron
  • Solder (preferably lead free)
  • Components you want to solder
  • Vent fan

Optional items:

  • Solder wick
  • De-soldering tool
  • Soldering mat

How to Strip a Wire:

Soldering two wires is the best way to practice soldering at the very beginning. There are two types of wire, either stranded or solid core. Both have a metal core wrapped in a plastic covering. To see the metal, you need to expose the core by removing the plastic. This can be done using wire strippers or wire cutters. When using wire strippers - place the wire in the slot written to be for the wire gauge you’re using and gently press around the tubing. You want to be sure to avoid cutting through the core of the wire since the goal is to expose the core. Once the perimeter of the covering has been cut through you will then remove it by slipping it off the core as seen below.

Procedure

  1. Grab a few wires, strip 1 cm off each end and bend each end in a U shape.
  2. Crimp the two wires together with a pair of pliers.
  3. Hold the soldering iron like a pen. Heat the two wires for 1-2 seconds and then flow solder on the connection. The goal is to heat the connection not the solder. Once you see the solder flow evenly throughout the connection, remove the solder and soldering iron.
  4. Allow the connection to cool, this usually takes 20-30 seconds. During this time, avoid moving the wires

Soldering THT

  1. Place the lead (metal stick coming from component) or wire through the hole in the Protoboard or PCB.
  2. Holding the soldering iron like a pen, heat the copper pad and lead with soldering iron until the solder begins to flow and forms a strong connection. Remove solder, and then the soldering iro. This process should take only a few seconds.
  3. Allow for the connection to cool


When soldering be sure that you don't use too much or too little solder - as seen below, ideally the joint should have a cone shape to it.


Soldering Considerations

Polarity

When soldering different components be sure to consider their polarity! Often times certain components will only work when connected a certain way, and example of such a component is an LED. LEDs have a positive and negative end and the component will only work when connected in a certain manner.

Heat Sensitivity

Due to various reasons such as material or size, certain components are only able to handle certain levels of heat when being soldered. If exposed to too much heat for too long, they are likely to burn out and become unusable.

Static Electricity

Certain components are incredibly sensitive to static electricity and thus require specific equipment when handling them. There are 4 types of ESD equipment used to aid in grounding you to avoid damaging the equipment.

There are gloves, mats, a wrist strap, and a bag, learn more about ESD Equipment here

Do's and Don'ts of Soldering

Remember to:

  1. Select the correct temperature
    • 700F (370C) for through hole components and wires
    • 600F (315C) for surface mount components
    • Higher temperatures can damage
  2. Clean the tip between uses
    • It’s better to use the gold wool to clean the tips rather than the sponges
  3. Wet the sponges before use
    • If the sponges are used dry, they burn and leave residue on the tips
  4. Tin the tip when you are using the iron
    • Add a small amount of solder to the iron to keep it from oxidizing when you place it in the holder

Do not:

  1. Do not leave the iron on. Leaving the iron can cause the tip to burn and will ruin in the iron over time
  2. Do not file the tip. The tips have a protective coating the will get ruined
  3. Don’t touch the mat or any plastics with the iron. A thin plastic film will form on the iron which will inhibit soldering. This includes heat shrink tubing.